PRELIMINARY DATA SHEET • SKY73103 VCO/SYNTHESIZER
Table 4. Load Register Word 0 (Programs the Operation Mode Register) (1 of 2)
Parameter
Function
State Description
Recommended
Operational Value
(Binary)
wd_0, wd_1
cp_output
Address bits [1:0]. Must be set to 00b (see
Table 3)
00
Charge pump setting [4:2]
Bits [4:2]:
Application
dependent
(see Table 11)
0 0 0 = 200 µA
0 0 1 = 400 µA
0 1 0 = 600 µA
0 1 1 = 800 µA
1 0 0 = 1000 µA
1 0 1 = 1200 µA
1 1 0 = 1400 µA
1 1 1 = 1600 µA
cp_delay
Charge pump delay [6:5]
Bits [6:5]:
00
0 0 = 2 nsec
0 1 = 4 nsec
1 0 = 7 nsec
1 1 = 9 nsec
pd_polar
Polarity of phase detector [7]
Bit [7]:
0
0
0 = negative
1 = positive
cp_tristate
Tri-state selection for the transmit PLL
charge pump output [8]
Bit [8]:
0 = charge pump in normal functional mode
1 = charge pump disabled/tri-stated
rsvd
Reserved [9]
Reserved
0
sd_sel
Internal operating voltage control bit for Σ∆
Bit [12] Bit [11] Bit [10]: N-Cntr/R-Divider Mod Dig
100
synthesizer [10]
Voltage
Voltage
Note: this bit needs to be programmed
together with bits [11] and [12].
0
1
1
1
1
X
0
0
1
1
X
0
1
0
1
=
=
=
=
=
0 V
0 V
1.8 V
1.8 V
2.4 V
2.4 V
1.8 V
2.4 V
1.8 V
2.4 V
nr_sel
Internal operating voltage control bit for N-
counter and R-divider [11]
This bit needs to be programmed together with bits [10] and [12].
This bit needs to be programmed together with bits [10] and [11].
Bits [14:13]:
–
–
See sd_sel parameter (bit [10])
pll_en
Internal operating voltage control bit for PLL
[12]
See sd_sel parameter (bit [10])
ref_bw_sel
Reference buffer bandwidth [14:13]
Application
dependent
(see Table 11)
0 0 = 20 MHz
0 1 = 30 MHz
1 0 = 40 MHz
1 1 = 50 MHz
test_mux
Lock detect and diagnostic output select
[17:15]
Bits [17:15]:
000
0 0 0 = lock detect output
0 0 1 = R-divider output
0 1 0 = N-divider output
0 1 1 = not used
1 0 0 = not used
1 0 1 = not used
1 1 0 = not used
1 1 1 = DPLL test
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200649B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • July 19, 2007
5