Document 290-1
Shielded Power Inductors
–
SER1360
The SER1360 series provides exceptionally high current car-
ryingcapability(upto43 Amps) and very low DC resistance,
all in a low profile, small footprint package.
The part’s magnetic shielding and 13 × 13 mm base allow
high density mounting while the flat wire winding keeps
the overall height to just 6 mm.
In addition to the standard values show, custom values
are available to meet specific applications.
Isat (A)5
Irms (A)6
21°C rise 41°C rise
Inductance2
±±10 (ꢀµ)
DCR (mOhm)3
SRF typ4
(Mµz)
Part number1
typ
max
±10 drop 210 drop 310 drop
SER1360-331KL_
SER1360-651KL_
SER1360-102KL_
SER1360-182KL_
SER1360-272KL_
0.33
0.65
1.0
1.8
2.7
0.77
0.77
2.36
2.36
2.36
0.85
0.85
2.60
2.60
2.60
200
160
75
50
42
36
23
32
17
12
41
27
33
19
13
43
28
33.5
20
14
13.0
13.0
9.5
9.5
9.5
16.9
16.9
13.0
13.0
13.0
SER1360-402KL_
SER1360-472KL_
SER1360-602KL_
SER1360-802KL_
SER1360-103KL_
4.0
4.7
6.0
8.0
10
5.50
5.50
5.50
9.83
9.83
6.05
6.05
6.05
10.81
10.81
34
32
28
26
24
11
9.5
8.0
7.5
6.2
12
11
9.0
8.5
7.0
13
12
9.5
9.0
7.5
7.1
7.1
7.1
5.5
4.4
9.4
9.4
9.4
7.6
7.2
1. When ordering, please specify termination and packaging codes:
SER±361-±13KLD
Termination: L = RoHS compliant matte-tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Designer’s Kit C365 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over tin over nickel over phos
bronze (pins 1 and 2); matte tin over nickel over phos bronze (pin 3).
Other terminations available at additional cost.
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
Weight 2.6 – 2.8 g
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/
HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A network analyzer and an
Agilent/HP 16193A test fixture.
5. DC current at which the inductance drops the specified amount from
its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Packaging 500 per 13″ reel; Plastic tape: 24 mm wide,
0.4 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Document 290-1 Revised 09/04/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.