5秒后页面跳转
SCG2500_15 PDF预览

SCG2500_15

更新时间: 2024-09-28 01:24:43
品牌 Logo 应用领域
CONNOR-WINFIELD /
页数 文件大小 规格书
10页 899K
描述
Synchronous Clock Generators

SCG2500_15 数据手册

 浏览型号SCG2500_15的Datasheet PDF文件第2页浏览型号SCG2500_15的Datasheet PDF文件第3页浏览型号SCG2500_15的Datasheet PDF文件第4页浏览型号SCG2500_15的Datasheet PDF文件第5页浏览型号SCG2500_15的Datasheet PDF文件第6页浏览型号SCG2500_15的Datasheet PDF文件第7页 
SCG2500  
Synchronous Clock  
Generators  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630- 851- 5040  
www.conwin.com  
General Description  
Features  
The SCG2500 is a mixed-signal phase lock loop  
generating CMOS outputs from an intrinsically low jitter  
voltage controlled crystal oscillator.  
The SCG2500 can lock to one of two possible input  
reference frequencies at 8 kHz which is selectable using  
one input select pin.  
Further features include an alarm output to indicate  
Loss of Reference, LOR, or Loss of Lock, LOL. If only  
one of the references is lost, the unit will disable its  
phase detector and will signal an alarm, but will not  
switch reference automatically. If both references are  
lost, the SCG2500 will enter a Free Run state which will  
guarantee a 20 ppm accurate output. Additionally, the  
Free Run mode may be entered manually by applying a  
high signal to the Force Free Run pin. If the unit is in  
Free Run mode, the Free Run status pin will be high.  
All outputs, except the Oscillator Output, may be put  
into the tri-state high impedance condition for external  
testing purposes by applying a high signal to the Reset/  
Tri-State pin.  
Phase Locked Output  
Frequency Control  
Intrinsically Low Jitter Crystal  
Oscillator  
Two Selectable References @ 8  
kHz  
Alarm Output  
Tri-Statable Alarm Outputs and  
Reference Output  
Force Free Run Function  
Automatic Free Run Operation  
upon loss of both references  
Input Duty Cycle Tolerant  
3.3 Volt Power Supply  
Small Size: 0.78” x 0.83” x 0.35”  
maximum  
The filtered 8 kHz is derived from the oscillator  
output. The offset between the filtered output and the  
reference input will change with each reference  
rearrangement.  
Surface Mount, DIL Package  
The package maximum dimensions are .780” x .830”  
x .35” on a six layer FR4 board with surface mount pins.  
Parts are assembled using high temperature solder to  
withstand surface mount reflow process.  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  

与SCG2500_15相关器件

型号 品牌 获取价格 描述 数据表
SCG2500-001.544M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-002.048M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG250-001.544M CONNOR-WINFIELD

获取价格

Clock Generator, Hybrid, PDSO14
SCG2500-019.44M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-020.48M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-034.368M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-044.736M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-051.84M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-077.76M CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, 0.780 X 0.830 INCH, 0.350 INCH HEIGHT, DIP-14
SCG2500-1.544 CONNOR-WINFIELD

获取价格

Support Circuit, 1-Func, PACKAGE-14