SC810
Single Input/Single Mode
Single-cell Li-ion Charger
POWER MANAGEMENT
Features
Description
Input voltage protection — 30V
Single input charger
Constant voltage — 4.2V, 1% regulation
Charging by current and voltage regulation (CC/CV)
Thermal limiting of charge current
Programmable fast-charge current
Current-limited adapter support — reduces power dis-
sipation in charger IC
Instantaneous CC-to-CV transition for faster charging
Three termination options — float-charge, automatic
re-charge, or forced re-charge to keep the battery
topped-off after termination without float-charging
Soft-start reduces adapter load transients
High operating voltage range permits use of unregu-
lated adapters
The SC810 is a linear single-cell Li-ion battery charger in a
6 lead 2×2mm MLPD Ultra-thin package. The input will
survive sustained input voltage up to 30V to protect
against hot plug overshoot and faulty charging adapters.
Charging begins automatically when a valid input source
is applied. Thermal limiting protects the SC810 from
excessive power dissipation. It can be programmed to
turn off when charging is complete or to continue operat-
ing as an LDO regulator while float-charging the battery.
The input will charge with an adapter operating in voltage
regulation or in current-limit to obtain the lowest possible
power dissipation by pulling the input voltage down to
the battery voltage. The maximum fast-charge current
setting is 1A.
Complies with CCSA YD/T 1591-2006
Space saving 2×2×0.6 (mm) MLPD package
Pb free, Halogen free, and RoHS/WEEE compliant
Charge current is programmed with a single resistor. Pre-
charge and termination current are fixed at 20% and 10%,
respectively, of the programmed fast-charge current.
Charge current steps up to the programmed value (soft
starts) to reduce load transients on the charging adapter.
Applications
Mobile phones
MP3 players
GPS handheld receivers
Typical Application Circuit
SC810
Device
Load
VADAPTER
VIN
ENB
BAT
STATB
GND
2.2 μF
IPRGM
2.2 μF
Battery
Pack
September 17, 2009
1
© 2009 Semtech Corporation