Datasheet > SBB503R3S

SBB503R3S

更新时间： 2024-01-16 19:00:57

品牌	Logo	应用领域
英飞凌 - INFINEON		/
页数	文件大小	规格书
12页	450K
描述
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-12

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SBB503R3S 技术参数

是否Rohs认证：	不符合	生命周期：	Active
包装说明：	, MODULE,12LEAD,2.5	Reach Compliance Code：	compliant
ECCN代码：	EAR99	风险等级：	5.54
模拟集成电路 - 其他类型：	DC-DC REGULATED POWER SUPPLY MODULE	控制模式：	VOLTAGE-MODE
最大输入电压：	5.5 V	最小输入电压：	4.5 V
标称输入电压：	5 V	JESD-30 代码：	R-XDMA-P12
长度：	48.26 mm	湿度敏感等级：	1
功能数量：	1	输出次数：	1
端子数量：	12	最大输出电流：	9.1 A
最大输出电压：	3.63 V	最小输出电压：	2.97 V
标称输出电压：	3.3 V	封装主体材料：	UNSPECIFIED
封装等效代码：	MODULE,12LEAD,2.5	封装形状：	RECTANGULAR
封装形式：	MICROELECTRONIC ASSEMBLY	峰值回流温度（摄氏度）：	225
认证状态：	Not Qualified	筛选级别：	MIL-PRF-38534
座面最大高度：	8.509 mm	子类别：	Switching Regulator or Controllers
表面贴装：	NO	最大切换频率：	440 kHz
技术：	HYBRID	端子形式：	PIN/PEG
端子节距：	5.08 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	总剂量：	100k Rad(Si) V
最大总功率输出：	30 W	微调/可调输出：	YES
宽度：	38.1 mm	Base Number Matches：	1

SBB503R3S 数据手册

PD-97563C

SBB SERIES

Single Output

HIGH RELIABILITY CLASS K HYBRID,

RADIATION HARDENED, NON-ISOLATED

POINT OF LOAD (POL) VOLTAGE REGULATOR

Description

The SBB Series point of load (POL) DC to DC voltage

regulators are high reliability hermetically sealed thick film

hybrids designed to provide a single regulated DC output

from a DC voltage source. The output power rating is 14W

to 30W depending on output voltage, with maximum current

SBB

rating of 14A. The POLs are class K qualified per MIL-PRF-38534.

These products are designed to operate continuously on

Features

 Total Dose > 100 kRads(Si)

 SEE Hardened rated with LET > 82 MeV.cm²/mg

 Operates from 4.5V to 5.5V DC supply

 Fixed output voltage: 1V, 1.2V, 1.5V, 1.8V, 2.5V

and 3.3V are standards

board a space craft up to the rated power output without

power de-rating for case temperature of 85°C.The POLs

are suitable for harsh radiation environments normally encountered

in the geo-synchronous orbit (GEO), medium earth orbit

(MEO), low earth orbit (LEO), deep space, and for other

challenging radiation design applications.

 Output power up to 30W or 14A maximum without

de-rating

 High efficiency to 89%

The SBB POL is a non isolated synchronous buck regulator. It

incorporates IR HiRel’s heritage-rich components and circuit

design library for long term reliability expected of system

designs with a mission life of up to 18 years or more. The

SBB Series of POLs operate from a DC input power source

with the voltage range of 4.5V to 5.5V. It converts DC input

voltage down to a fixed and highly stable DC output. The

standard voltage outputs are 1.0V, 1.2V, 1.5V, 1.8V, 2.5V,

and 3.3V. The output is adjustable with the addition of an

external resistor. The output adjustment range is approximately

±10% of a nominal output voltage. Also included is remote

sensing capability to compensate for voltage drops in the

output lines. This feature, in combination with the output

adjustment capability, enables an output voltage of a POL to be

accurately set as needed.

 Remote sense compensation

 Fixed 400 kHz operating frequency

 Output adjustable to ±10% of nominal output with

an external resistor

 Enable function pin for remote on/off control

 Input under voltage and output under voltage protection

 Overload and short circuit protection

 Low noise with integrated input and output filters

 No external filter capacitors required

 Soft start

 Under voltage lockout (UVLO)

 Synchronization

 Output Status Telemetry (POK)

 -55 to +85°C operating case temperature without

output power de-rating

 MIL-PRF-38534 element evaluated components

With its excellent efficiency performance, SBB POLs are

ideal as the point of load regulators for the distributed power

architecture (DPA) design systems. Other key benefits include

excellent dynamic load response, precise voltage setting,

remote output voltage sensing and synchronization.

 Custom versions available

 De-rating per MIL-STD-1547 for space flight

 MTBF > 2.8 million hours for space flight environments

 Standard Microcircuit Drawings (SMDs) Available

2016-05-19

12 3 4 5 6 7...12

中文翻译

下载PDF

与SBB503R3S相关器件

型号	品牌	获取价格	描述	数据表
SBB503R3S/CKA	INFINEON	获取价格	DC-DC Regulated Power Supply Module, Hybrid,
SBB503R3S/CKC	INFINEON	获取价格	DC-DC Regulated Power Supply Module
SBB503R3S/EM	INFINEON	获取价格	DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-12
SBB503R3SCKA	INFINEON	获取价格	HIGH RELIABILITY CLASS K HYBRID RADIATION HARDENED, NON-ISOLATED
SBB503R3SCKC	INFINEON	获取价格	HIGH RELIABILITY CLASS K HYBRID RADIATION HARDENED, NON-ISOLATED
SBB-5089	SIRENZA	获取价格	0.05-6 GHz, Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier
SBB5089Z	RFMD	获取价格	50MHz to 6000MHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER
SBB-5089Z	SIRENZA	获取价格	0.05-6 GHz, Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier
SBB5089ZPCK1	RFMD	获取价格	50MHz to 6000MHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER
SBB5089ZSQ	RFMD	获取价格	50MHz to 6000MHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER

与SBB503R3S相关文章

SL74HC10N：高性能三输入与非门解析
2024-09-03

43
AIC1781A 电池充电控制器深度解析
2024-09-03

30
Pickering新高压舌簧继电器亮相汽车测试博览会
2024-08-26

68
采用MCU+MPU双处理器架构实现的创新应用设计探索
2024-08-23

75

产品中心

服务支持

精选活动

关于我们

帮助中心

SBB503R3S

SBB503R3S 技术参数

SBB503R3S 数据手册

与SBB503R3S相关器件

与SBB503R3S相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SBB503R3S

SBB503R3S 技术参数

SBB503R3S 数据手册

与SBB503R3S相关器件

与SBB503R3S相关文章

您还可以找

您在本页遇到什么问题？