Datasheet > SA605D,602

SA605D,602

更新时间： 2024-02-02 20:44:18

品牌	Logo	应用领域
恩智浦 - NXP		/
页数	文件大小	规格书
13页	124K
描述
暂无描述

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SA605D,602 数据手册

Philips Semiconductors

Product specification

High performance low power mixer FM IF system

SA605

network does not cause 12dB(v) insertion loss, a fixed or variable

resistor can be added between the first IF output (Pin 16) and the

interstage network.

CIRCUIT DESCRIPTION

The SA605 is an IF signal processing system suitable for second IF

or single conversion systems with input frequency as high as 1GHz.

The bandwidth of the IF amplifier is about 40MHz, with 39.7dB(v) of

gain from a 50Ω source. The bandwidth of the limiter is about

28MHz with about 62.5dB(v) of gain from a 50Ω source. However,

the gain/bandwidth distribution is optimized for 455kHz, 1.5kΩ

source applications. The overall system is well-suited to battery

operation as well as high performance and high quality products of

all types.

The signal from the second limiting amplifier goes to a Gilbert cell

quadrature detector. One port of the Gilbert cell is internally driven

by the IF. The other output of the IF is AC-coupled to a tuned

quadrature network. This signal, which now has a 90° phase

relationship to the internal signal, drives the other port of the

multiplier cell.

Overall, the IF section has a gain of 90dB. For operation at

intermediate frequencies greater than 455kHz, special care must be

given to layout, termination, and interstage loss to avoid instability.

The input stage is a Gilbert cell mixer with oscillator. Typical mixer

characteristics include a noise figure of 5dB, conversion gain of

13dB, and input third-order intercept of -10dBm. The oscillator will

operate in excess of 1GHz in L/C tank configurations. Hartley or

Colpitts circuits can be used up to 100MHz for xtal configurations.

Butler oscillators are recommended for xtal configurations up to

150MHz.

The demodulated output of the quadrature detector is available at

two pins, one continuous and one with a mute switch. Signal

attenuation with the mute activated is greater than 60dB. The mute

input is very high impedance and is compatible with CMOS or TTL

levels.

The output of the mixer is internally loaded with a 1.5kΩ resistor

permitting direct connection to a 455kHz ceramic filter. The input

resistance of the limiting IF amplifiers is also 1.5kΩ. With most

455kHz ceramic filters and many crystal filters, no impedance

matching network is necessary. To achieve optimum linearity of the

log signal strength indicator, there must be a 12dB(v) insertion loss

between the first and second IF stages. If the IF filter or interstage

A log signal strength completes the circuitry. The output range is

greater than 90dB and is temperature compensated. This log signal

strength indicator exceeds the criteria for AMPs or TACs cellular

telephone.

NOTE: dB(v) = 20log V

OUT IN

1997 Nov 07

1 2 3 456 7 8...13

下载PDF

与SA605D,602相关器件

型号	品牌	描述	获取价格	数据表
SA605D/01,118	NXP	SA605 - High performance low power mixer FM IF system SOP 20-Pin	获取价格
SA605D01	NXP	High performance low power mixer FM IF system	获取价格
SA605DJ	YAGEO	Audio Single Chip Receiver, FM, PDSO20, PLASTIC, SSOP-20	获取价格
SA605DK	NXP	HIGH PERFORMANCE LOW POWER MIXER FM IF SYSTEM	获取价格
SA605DK,118	NXP	SA605 - High performance low power mixer FM IF system SSOP2 20-Pin	获取价格
SA605DK/01,112	NXP	SA605 - High performance low power mixer FM IF system SSOP2 20-Pin	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

SA605D,602

SA605D,602 数据手册

与SA605D,602相关器件

与SA605D,602相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SA605D,602

SA605D,602 数据手册

与SA605D,602相关器件

与SA605D,602相关文章

您还可以找

您在本页遇到什么问题？