Datasheet > SA606DK/01,118

SA606DK/01,118

更新时间： 2024-02-29 19:41:41

品牌	Logo	应用领域
恩智浦 - NXP		电信光电二极管电信集成电路
页数	文件大小	规格书
33页	541K
描述
SA606 - Low-voltage high performance mixer FM IF system SSOP2 20-Pin

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SA606DK/01,118 技术参数

是否Rohs认证：	符合	生命周期：	Active
零件包装代码：	SSOP2	包装说明：	LSSOP,
针数：	20	Reach Compliance Code：	compliant
HTS代码：	8542.39.00.01	风险等级：	0.58
JESD-30 代码：	R-PDSO-G20	JESD-609代码：	e4
长度：	6.5 mm	湿度敏感等级：	1
功能数量：	1	端子数量：	20
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	LSSOP
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	260	认证状态：	Not Qualified
座面最大高度：	1.5 mm	标称供电电压：	3 V
表面贴装：	YES	电信集成电路类型：	TELECOM CIRCUIT
温度等级：	INDUSTRIAL	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	30
宽度：	4.4 mm	Base Number Matches：	1

SA606DK/01,118 数据手册

SA606

Low-voltage high performance mixer FM IF system

Rev. 6 — 8 November 2013

Product data sheet

1. General description

The SA606 is a low-voltage high performance monolithic FM IF system incorporating a

mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector,

logarithmic Received Signal Strength Indicator (RSSI), voltage regulator and audio and

RSSI op amps. The SA606 is available in SO20 and SSOP20 packages.

The SA606 was designed for portable communication applications and will function down

to 2.7 V. The RF section is similar to the famous SA605. The audio and RSSI outputs

have amplifiers with access to the feedback path. This enables the designer to adjust the

output levels or add filtering.

2. Features and benefits

 Low power consumption: 3.5 mA typical at 3 V

 Mixer input to >150 MHz

 Mixer conversion power gain of 17 dB at 45 MHz

 XTAL oscillator effective to 150 MHz (LC oscillator or external oscillator can be used at

higher frequencies)

 102 dB of IF amp/limiter gain

 2 MHz IF amp/limiter small signal bandwidth

 Temperature compensated logarithmic RSSI with a 90 dB dynamic range

 Low external component count; suitable for crystal/ceramic/LC filters

 Excellent sensitivity: 0.31 V into 50  matching network for 12 dB SINAD

(Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at

455 kHz

 SA606 meets cellular radio specifications

 Audio output internal op amp

 RSSI output internal op amp

 Internal op amps with rail-to-rail outputs

 ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per

JESD22-C101

 Latch-up testing is done to JEDEC Standard JESD78 Class II, Level B

3. Applications

 Portable cellular radio FM IF

 Cordless phones

 Wireless systems

 RF level meter

12 3 4 5 6 7...33

下载PDF

与SA606DK/01,118相关器件

型号	品牌	描述	获取价格	数据表
SA606DK/01-T	NXP	Low-voltage high performance mixer FM IF system	获取价格
SA606DK/03	NXP	SPECIALTY TELECOM CIRCUIT, PDSO20, 4.40 MM, PLASTIC, MO-152, SOT266-1, SSOP-20	获取价格
SA606DK-T	NXP	暂无描述	获取价格
SA606D-T	NXP	IC SPECIALTY TELECOM CIRCUIT, PDSO20, Telecom IC:Other	获取价格
SA606N	PHILIPS	Receiver IC, Bipolar, PDIP20	获取价格
SA607	NXP	Low-voltage high performance mixer FM IF system	获取价格