CCD area image sensor S7030/S7031 series
Specifications of built-in temperature sensor
ꢀꢀ
A chip thermistor is built in the same package with a CCD chip, and the CCD chip temperature can be monitored with it. A relation
between the thermistor resistance and absolute temperature is expressed by the following equation.
1 MΩ
R1 = R2 × expB (1 / T1 - 1 / T2)
where R1 is the resistance at absolute temperature T1 (K)
R2 is the resistance at absolute temperature T2 (K)
B is so-called the B constant (K)
The characteristics of the thermistor used are as follows.
R (298K) = 10 kΩ
100 kΩ
B (298K / 323K) = 3450 K
10 kΩ
220
240
260
280
300
TEMPERATURE (K)
KMPDB0111EB
ꢀꢀPrecaution for use (Electrostatic countermeasures)
ꢀ Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
ꢀ Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
ꢀ Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to dis-
charge.
ꢀ Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
ꢀꢀElement cooling/heating temperature incline rate
When cooling the CCD by an externally attached cooler, set the cooler operation so that the temperature gradient (rate of tempera-
ture change) for cooling or allowing the CCD to warm back is less than 5 K/minute.
Multichannel detector heads C7040, C7041
Features
C7040: for S7030 series
C7041: for S7031 series
Area scanning or full line-binnng operation
Readout frequency: 250 kHz
-
Readout noise: 20 e rms
∆T=50 ˚C (∆T changes by cooling method.)
Input
Symbol
VD1
VA1+
VA1-
VA2
Value
+5 Vdc, 200 mA
+15 Vdc, +100 mA
-15 Vdc, -100 mA
+24 Vdc, 30 mA
Supply voltage
VD2
Vp
VF
+5 Vdc, 30 mA (C7041)
+5 Vdc, 2.5 A (C7041)
+12 Vdc, 100 mA (C7041)
HCMOS logic compatible
HCMOS logic compatible,
1 MHz
Master start
Master clock
φms
φmc
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KMPD1023E14
Nov. 2007 DN
8
5秒后页面跳转
PCF8574资料解读：主要参数分析、引脚说明
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
一文带你了解压敏电阻器在直流电路中的过压保护作用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
