RT7752
PWM Controller for Programmable Power Converter (USBPD)
General Description
Features
Optimized for Adaptive Output Power
Wide VDD Range : 10V to 40V
Adaptive Output Over-Voltage Protection
Adaptive Over-Current Protection
Adaptive Loop Gain Control for Loop Stability
High Efficiency
The RT7752 series is specifically designed to work with
controllers, such as RT7202, to provide a total solution
for USB PD or a programmable power adapter. The
RT7752 can achieve high efficiency, meet safety
standards, and consume less than 50mW of power in a
5V standby condition.
The RT7752 includes several innovations in order to
provide a solution with a wide range of output voltage.
By way of DMAG pin, the RT7752 senses output
voltage to adjust loop gain for system stability, to adjust
output over-voltage protection threshold voltage to
protect external devices, and to adjust current limit to
meet Limited Power Source (LPS) safety requirements.
Green Mode Operation at Light Load and No
Load
Comprehensive Protection Features
Bulk-Capacitor Brown-In and Brown-Out
Protection
VDD Over-Voltage Protection
Output Over-Voltage and Under-Voltage
Protection
The RT7752 is also equipped with comprehensive
protection features, including Bulk-Capacitor brown-in
/brown-out protection, VDD over-voltage protection
External Over-Temperature Protection
Secondary Rectifier Short-Circuit Protection
Programmable Line Compensation
Others
(VDD OVP),
output
over-voltage/under-voltage
protection (Output OVP/UVP), secondary rectifier
short-circuit protection (SRSP), and external
over-temperature protection (External OTP). For
constant output power regulation, a resistor connected
to CS pin can be used to achieve accurate line
compensation across the universal input voltage range.
The RT7752 also provides various features to protect
against any failures occurring at the secondary-side
component, such as the RT7202 or a shunt regulator.
< 50mW in 5V Standby Mode for Power Saving
Driver Capability : 300mA/300mA
SmartJitterTM Technology
Applications
USB PD and Programmable Power Adapters
The RT7752 and the RT7202 work together to realize a
robust and safe design to prevent all the potential fault
scenarios, which may arise from versatile and unknown
connections to various devices, cables, plugs and
receptacles.
Simplified Application Circuit
Option
VBUS
L
1
2
N
GND
RT7202A
VDD
OPTO
Option
GND
CS-
VFB
USBP
CC1
RT7752
GATE
DMAG
Option
V2
CC1
VDD
COMP
GND
Option
4
CS
3
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS7752-06 December 2019
www.richtek.com
1