• 2:1 Wide Input Range
Features
• 2kVDC/1 Second Isolation
DC/DC Converter
• -40°C To +80°C Operating Temperature @ Full Load
• Industry Standard Pinout (SIP8)
• EN/UL62368, UL60950, CB Report (pending)
• Low Cost
Regulated
Converters
RSOE
Description
1 Watt
3
The RSOE is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for
industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating
temperature range of -40°C to +80°C without derating makes the RSOE series ideal for industrial,
transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met
with a simple Pi-filter and the converters come with a three year warranty.
SIP8
Single Output
Selection Guide
Part
Number
Input
Voltage Range
[VDC]
Input Current
@ full load
[mA]
Output
Voltage Current
[VDC]
Output
Efficiency max. Capacitive
typ. (1)
[%]
Load (2)
[µF]
[mA]
200
200
RSOE-0505S/H2
RSOE-2405S/H2
4.5 - 9
18 - 36
265
52
5
5
76
80
6800
6800
Notes:
Note1: Efficiency is tested at nominal input and full load at +25°C ambient
Note2: Max. cap load is tested at nominal input and full resistive load
Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified)
E224736
UL62368-1 certified
C22.2 No. 62368-1-14 certified
UL60950 (pending)
C22.2 No. 60950-1-07 (pending)
IEC/EN62368-1 (pending)
EN55022/55024 compliant
CB Report
BASIC CHARACTERISTICS
Parameter
Internal Input Filter
Condition
Min.
Typ.
Max.
capacitor
5VDC
24VDC
4.5VDC
18VDC
5VDC
24VDC
9VDC
36VDC
0VDC
Input Voltage Range
nom. Vin=
Maximum Reverse Voltage
Input Surge Voltage
15VDC
50VDC
5VDC
24VDC
100ms max. nom. Vin=
nom. Vin=
40mA
3mA
5VDC
24VDC
Quiescent Current
500µs
450µs
10µs
Start-up time
Rise time
Hold-up time
130kHz
0%
Internal Operating Frequency
Minimum Load
Output Ripple and Noise (3)
20MHz BW, 0-100% load
75mVp-p
Open or 0V<Vr<0.8VDC
2V<Vr<6VDC
DC-DC ON
DC-DC OFF
ON/OFF CTRL (4)
15mA
10mA
5V VCTRL
3.3V VCTRL
Input Current of CTRL Pin
0.75mA
1.5mA
Standby Current
Notes:
Note3: Measurements are made with a 0.1µF MLCC across output (low ESR)
Note4: Please refer to „Application and Installation“
continued on next page
www.recom-power.com
REV.: 1/2017
ECO-1