Solid State Relays
Analog Full Cycle Switching
Type RN.F...
• AC solid state relay, 1- and 2 poles
• Analog switching for resistive loads (heating)
• 4-20 mA or 0-10 V controls
• Rated operational current 30 and 50 AACrms
• Rated operational voltage up to 480 VAC
• LED-indication for normal operation and alarm status
• IP 20 protection
• DIN-rail mountable
Product Description
Ordering Key
RN 1 F 40 V 30
The analog switching relay pro- principle operates with zero Solid State Relay
vides a number of full cycles, switching, thus ensuring a Number of poles
evenly distributed over a fixed reduced level of radiated and Switching type
period, depending of the con- wire conducted noise. The 2- Rated operational voltage
trol input. The input of 4-20 mA pole type has alarm LED indi- Control signal
or 0-10 VDC respectively, cation by loss of master Rated operational current
corresponds to zero and full phase. The analogue Full
output within a period of 1.28 s Cycle Switching is not recom-
@ 50 Hz (1.07 s @ 60 Hz). This mended for light control due
principle makes the transfer to light-flickering.
characteristics fully linear. The
Type Selection, 1-Pole
Rated
operational voltage
Control
input
Control
supply
Rated operational current
30 A
50 A
120 VAC
230 VAC
480 VAC
4-20 mA
0-10 VDC
-
RN 1F12I30
RN 1F12V30
RN 1F12I50
RN 1F12V50
12-32 VDC, 24 VAC
4-20 mA
0-10 VDC
-
RN 1F23I30
RN 1F23V30
RN 1F23I50
RN 1F23V50
12-32 VDC, 24 VAC
4-20 mA
0-10 VDC
-
RN 1F48I30
RN 1F48V30
RN 1F48I50
RN 1F48V50
12-32 VDC, 24 VAC
Type Selection, 2-Pole
Rated
operational voltage
Control
input
Control
supply
Rated operational current
30 A
50 A
120 VAC
230 VAC
480 VAC
4-20 mA
0-10 VDC
-
RN 2F12I30
RN 2F12V30
RN 2F12I50
RN 2F12V50
12-32 VDC, 24 VAC
4-20 mA
0-10 VDC
-
RN 2F23I30
RN 2F23V30
RN 2F23I50
RN 2F23V50
12-32 VDC, 24 VAC
4-20 mA
0-10 VDC
-
RN 2F48I30
RN 2F48V30
RN 2F48I50
RN 2F48V50
12-32 VDC, 24 VAC
Specifications are subject to change without notice (04.02.00)
1