5秒后页面跳转
RI-21A PDF预览

RI-21A

更新时间: 2024-09-29 04:08:23
品牌 Logo 应用领域
COTO 开关
页数 文件大小 规格书
2页 248K
描述
Dry Reed Switch

RI-21A 技术参数

是否无铅: 不含铅生命周期:Contact Manufacturer
Reach Compliance Code:compliant风险等级:5.63
主体高度:14.5 mm主体长度或直径:2.54 mm
触点(交流)最大额定R负载:.5A@250VAC最大触点电流(交流):0.5 A
最大触点电流(直流):0.5 A触点(直流)最大额定R负载:.5A@200VDC
最大触点电压(交流):250 V最大触点电压(直流):200 V
输出价值最小值:8 AT电气寿命:10000000 Cycle(s)
安装特点:THROUGH HOLE-STRAIGHT最高工作温度:125 °C
最低工作温度:-55 °C最大牵引值:32 AT
最小牵引值:18 AT谐振频率标称:5.5 kHz
密封:HERMETICALLY SEALED表面贴装:NO
开关功能:SPST开关类型:DRY REED SWITCH
端接类型:SOLDERBase Number Matches:1

RI-21A 数据手册

 浏览型号RI-21A的Datasheet PDF文件第2页 
RI-21 Series Dry Reed Switch  
RI-21 Series  
Micro dry-reed switch hermetically sealed in a gas-filled envelope.  
Single-pole, single-throw (SPST) type, having normally open contacts,  
and containing two magnetically actuated reeds.  
The switch is of the double-ended type and may be actuated by an  
electromagnet, a permanent magnet or a combination of both.  
The device is intended for use in sensors, relays, pulse counters or  
similar devices.  
RI-21 Series Features  
General purpose reed switch  
High breakdown voltage  
Contact layers: gold, plated ruthenium  
Superior glass-to-metal seal and blade alignment  
Excellent life expectancy and reliability  
Dimensions in inches (mm)  
General data for all models RI-21  
AT-Customization / Preformed Leads  
End of life criteria:  
Besides the standard models, customized products can  
also be supplied offering the following options:  
! Operate and release ranges to customer  
specification  
Contact resistance > 1after 2 ms  
Release time > 2 ms (latching or contact sticking).  
Loaded conditions (resistive load: 12 V; 4 mA;  
(15 mA peak); operating frequency: 170 Hz)  
Life expectancy: min. 107 operations with a failure rate  
of less than 10-8 with a confidence level of 90%.  
! Cropped and/or preformed leads  
Coils  
All characteristics are measured using the Philips  
Standard Coil. For definitions of the Philips Standard  
Coil, refer to “Application Notes” in the Reed Switch  
Technical & Application Information Section of this  
catalog.  
End of life criteria:  
Contact resistance > 2after 4 ms  
Release time > 0.7 ms (latching or contact  
sticking). Switching different loads involves  
different life expectancy and reliability data. Further  
information is available on request.  
Life expectancy and reliability  
The life expectancy data given below are valid for a  
coil energized at 1.25 times the published maximum  
operate value for each type in the RI-21 series.  
Mechanical Data  
Contact arrangement is normally open; lead finish is  
tinned; net mass is approximately 190 mg; and can be  
mounted in any position.  
No load conditions (operating frequency: 100Hz)  
Life expectancy : min. 108 operations with a failure  
rate of less than 10-9 with a confidence level of 90%.  
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920  
6
(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216  
110  

与RI-21A相关器件

型号 品牌 获取价格 描述 数据表
RI-21AA COTO

获取价格

Dry Reed Switch
RI-21AAA COTO

获取价格

Dry Reed Switch
RI-21B COTO

获取价格

Dry Reed Switch
RI-21C COTO

获取价格

Dry Reed Switch
RI-23 COTO

获取价格

Dry Reed Switch
RI23109U ETC

获取价格

Microwave/Millimeter Wave Amplifier
RI23110 SKYWORKS

获取价格

CDMA PCS 3-4 Volt Power Amplifier (1720-1910 MHz)
RI-23A COTO

获取价格

Dry Reed Switch
RI-23AA COTO

获取价格

Dry Reed Switch
RI-23AAA COTO

获取价格

Dry Reed Switch