RA8911
Version 1.5
8-Bit Micro-Controller
Overview
RA8911 is an 8-bit downloadable micro-controller. Up to 22MHz system clock makes it a perfect choice for
high-end device. It contains a 16x16 Multiplier and Accumulator (MAC), which not only greatly reduce
programmer’s effort, but also shorten development time. RA8911 is embedded 4-channel 10-Bit ADC that
can vary your application fields in analog detection, such as temperature, pressure, humidity, etc. Moreover,
matched with LCM (LCD Module), 10-bit ADC can be perfectly used in Touch Panel function.
RA8911 is suitable for any downloadable device no matter used by end-users for voice/data download, or
used by programmers for S/W program updated. The built-in 4K-byte ROM supports the on-chip RAiO ICE
Monitor program, ISP(In-System Programming) and ISD(In-System Debugging), which controls the UART
and enables the RS232 connection between the RA8911 and a PC host. Besides that, IrDA application is
also allowed to give the device multiple attractive characteristics.
In short, RA8911 supports embedded 4K-byte SRAM, three I/O ports, LCD interface, built in PLL / RC
Oscillator, LVD, multiple timer/counter sources, versatile interrupt-handling architecture, built-in one DAC
(Digital-to-Analog Converters), 16x16 Multiplier and Accumulator (MAC) and support 4-channel 10-Bit ADC.
Feature
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
8-bit Micro Processor for Maximum 22MHz
Internal 4K-Byte SRAM
ꢀ
ꢀ
Support 4-channel 10-bit ADC with Touch
Panel Function
One User’s UART with Baud Rate
Generator, Up to 115200bps
Flexible External Flash Support
Flexible I/O Interrupt & Wake-Up Mode
Support Wake-Up Reset Mode
Support LVD(Low Voltage Detector)
Support External Memory
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
UART Provide IrDA/ASK IR/Normal Mode
Support UART Wakeup
Support Idle/Sleep/Power Saving Mode
Support Timer Wake-Up Mode
Support LCD Interface
Support H/W 16x16 Multiplier with Adder
Option
Support PWM Output with 50% or 100%
duty select
ꢀ
ꢀ
1Hz, 2Hz and 1/60Hz Interrupt/Wake up
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Three 8-Bits Programmable I/O Port
Three 12-Bits Timer
Built in PLL, Only need one 32768Hz X’tal
or Resistor for Oscillator
Six Time-Base Options
Watch Dog Timer
ꢀ
ꢀ
ꢀ
Low Power Consumption
Operating Voltage: 2.2V ~ 4.5V
Package: Die Form or PQFP-100Pin
One 4 -Level 10-bits Fixed Current Mode
DAC
2/10
RAiO TECHNOLOGY INC.
www.raio.com.tw