Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Performance Characteristics cont'd
Storageꢀtime:ꢀ≤ꢀ24ꢀmonthsꢀfromꢀtheꢀdateꢀmarkedꢀonꢀtheꢀlabelꢀpackage
Averageꢀrelativeꢀhumidityꢀperꢀyearꢀ≤ꢀ70%ꢀ
Storage Conditions
RHꢀ≤ꢀ85%ꢀforꢀ30ꢀdaysꢀrandomlyꢀdistributedꢀthroughoutꢀtheꢀyear
Dew is absent
Temperature:ꢀ−40ꢀtoꢀ80°Cꢀ(seeꢀ"MaximumꢀHumidityꢀinꢀStorageꢀConditions"ꢀgraphꢀbelow)
1.6 x VRꢀVDCꢀforꢀ2ꢀsecondsꢀ(betweenꢀterminations)ꢀatꢀ+25°Cꢀ±5°C
Test Voltage
Maximumꢀ0.5%ꢀafterꢀaꢀ2ꢀyearꢀstorageꢀperiodꢀatꢀaꢀtemperatureꢀofꢀ+10°Cꢀtoꢀ+40°Cꢀandꢀaꢀrelativeꢀhumidityꢀofꢀ40%ꢀtoꢀ
60%
Capacitance Drift
Maximum Pulse
Steepness
dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <VR),ꢀtheꢀspecifiedꢀdv/dtꢀ
can be multiplied by the factor VR/Vpp
TemperatureꢀCoefficient
−(200ꢀ±100)ꢀppm/°Cꢀatꢀ1ꢀkHz
Lead Spacing
7.5
8
10
9
15
10
22.5
18
27.5
18
37.5
20
(mm)
Self Inductance
(Lead Length ~ 2 mm)
Lꢀ(nH)ꢀ≈
Maximum 1 nH per 1 mm lead and capacitor length.
MaximumꢀValuesꢀatꢀ25°Cꢀ±5°C
Frequency
1 kHz
Cꢀ≤ꢀ0.1ꢀµF
0.04%
0.1ꢀµFꢀ<ꢀCꢀ≤ꢀ1.0ꢀµF 1.0ꢀµFꢀ<ꢀCꢀ≤ꢀ4.7ꢀµF
C > 4.7 µF
DissipationꢀFactorꢀtanδ
0.05%
0.08%
-
0.06%
0.10%
10 kHz
0.06%
-
-
-
-
100 kHz
0.25%
Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀ100ꢀVDCꢀ60ꢀseconds
Minimum Values Between Terminals
Insulation Resistance
Cꢀ≤ꢀ0.33ꢀμF
Cꢀ>ꢀ0.33ꢀμF
≥ꢀ100,000ꢀMΩ
(ꢀ≥ꢀ500,000ꢀMΩꢀ)*
≥ꢀ30,000ꢀMΩꢀ•ꢀµF
(ꢀ≥ꢀ150,000ꢀMΩꢀ•ꢀµFꢀ)*
* typical value
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regardingꢀtestꢀmethodsꢀandꢀconditionsꢀareꢀreferencedꢀinꢀdocumentꢀAEC–Q200,ꢀStressꢀTestꢀQualificationꢀforꢀPassiveꢀ
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3106_R75 • 8/23/2016
6