R.47
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PRꢀPERTIES
Taped
Loose
Fig.2
Fig.1
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRꢀDUCT CꢀDE: R47
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
p ≤15
22.5 ≤ p ≤ 27.5
p = 37.5
1.0
Ø d ±0.05
All
0.6 or 0.8*
0.8
All
*See size table.
All dimensions are in mm.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
GENERAL TECHNICAL DATA
Dielectric: polypropylene film - 2 sections.
Test conditions 1st
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Temperature:
+40°C ± 2°C
93% ±2%
56 days
Relative humidity (RH):
Test duration:
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Performance
Climatic category: 40/110/56 IEC 60068-1
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14; EN 60384-14.
ELECTRICAL CHARACTERISTICS
Endurance:
Rated voltage (VR):
Capacitance range:
440Vac / 1000Vdc; 50/60Hz
4700pF to 2.2µF
Test conditions
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Performance
Tolerance ±5% (J) available
upon request.
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤10%
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz
*
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Typical value
Test conditions
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
≥1x105 MΩ
≥30000 s
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
+25°C±5°C
1 min
100 Vdc
Performance
Capacitance change |∆C/C|:≤2%
for C≤0.33µF
for C>0.33µF
Winding scheme
Test voltage between terminations (on all pieces):
1700Vac for 1 s + 2700Vdc for 1 s at +25°C±5°C
single sided metallized
polypropylene film
2 sections
09/2008
159