Datasheet > R3-PA2W/Q

R3-PA2W/Q

更新时间： 2024-01-13 11:43:24

品牌	Logo	应用领域
爱模 - MSYSTEM		编码器输入元件
页数	文件大小	规格书
5页	125K
描述
Remote I/O R3 Series ENCODER INPUT MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

R3-PA2W/Q 数据手册

MODEL: R3-PA2

Remote I/O R3 Series

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R3-BSx)

Input, Output: M3 separable screw terminal

(torque 0.5 N·m)

ENCODER INPUT MODULE

(RS-422 input; alarm output)

27.5 [1.08]

Internal power: Via the Installation Base (model: R3-BSx)

Screw terminal: Nickel-plated steel

Isolation: Input 1 to input 2 to internal bus or internal power

Alarm output: Two outputs per channel available; setpoints

are programmable for the speed or the position data by

using the R3CON PC Configurator software.

DIP switch settings:

130

[5.12]

109

[4.29]

•Input range

•Count Mode

mm [inch]

•Alarm Contact Form

•Start Count

MODEL: R3-PA2[1][2]

(Refer to the instruction manual)

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Green LED turns on in normal operating

conditions.

ORDERING INFORMATION

• Code number: R3-PA2[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R3-PA2W/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

Low-end cutout: 0.1 %

Reset input: Position data reset to ‘0’ when the external

contact is closed. (Reset count can be changed using the

R3CON PC Configurator software.)

NO. OF CHANNELS

2: 2

INPUT SPECIFICATIONS

[1] COMMUNICATION MODE

S: Single

Input: RS-422 line driver, two-phase pulse (Up/down count is

not performed correctly by either phase A or phase B input)

■ENCODER PULSE INPUT

W: Dual

Input range: 0 – 100 kHz, 0 – 10 kHz, 0 – 1 kHz, 0 – 100 Hz,

0 – 10 Hz, 0 – 1 Hz, 0 – 0.1 Hz

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

Minimum pulse width requirement: 5 μsec. for both ON and

OFF

■ Reset Input (contact input)

/CE: CE marking

Number of input: 1 contact per input (2 in total)

Isolation: Optical isolator + transformer (internal excitation

supply)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

Input resistance: Approx. 5.9 kΩ

Common: Negative (2 terminals)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Sensing voltage: 13 V DC (max. 24 V with no load)

ON current/voltage: ≥ 1.5 mA (≥ 9V)

OFF current/voltage: ≤ 0.75 mA (≤ 4.5V)

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-8386)

R3-PA2 SPECIFICATIONS

ES-8386 Rev.10 Page 1/5

https://www.m-system.co.jp/

12 3 4 5

中文翻译

下载PDF

与R3-PA2W/Q相关器件

型号	品牌	获取价格	描述	数据表
R3-PA4	MSYSTEM	获取价格	Remote I/O R3 Series HIGH SPEED PULSE INPUT MODULE
R3-PA4A	MSYSTEM	获取价格	Remote I/O R3 Series HIGH SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4B	MSYSTEM	获取价格	Remote I/O R3 Series LOW SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4BS	MSYSTEM	获取价格	Remote I/O R3 Series LOW SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4BS/Q	MSYSTEM	获取价格	Remote I/O R3 Series LOW SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4BW	MSYSTEM	获取价格	Remote I/O R3 Series LOW SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4BW/Q	MSYSTEM	获取价格	Remote I/O R3 Series LOW SPEED TOTALIZED PULSE INPUT MODULE
R3-PA4S	MSYSTEM	获取价格	Remote I/O R3 Series HIGH SPEED PULSE INPUT MODULE
R3-PA4S/Q	MSYSTEM	获取价格	Remote I/O R3 Series HIGH SPEED PULSE INPUT MODULE
R3-PA4W	MSYSTEM	获取价格	Remote I/O R3 Series HIGH SPEED PULSE INPUT MODULE

与R3-PA2W/Q相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

15
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

18
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

11
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

17

产品中心

服务支持

精选活动

关于我们

帮助中心

R3-PA2W/Q

R3-PA2W/Q 数据手册

与R3-PA2W/Q相关器件

与R3-PA2W/Q相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

R3-PA2W/Q

R3-PA2W/Q 数据手册

与R3-PA2W/Q相关器件

与R3-PA2W/Q相关文章

您还可以找

您在本页遇到什么问题？