R1171x Series
2A/1.5A LDO
The R1171x Series are CMOS-based LDO regulators featuring 2A/1.5A output. The TO-252-5-P1 and the HSOP-6J that support high
wattage can provide the output current up to 2A and 1.5A, respectively. The CMOS process provides both high output current and low
supply current. The dropout voltage is significantly lower than bipolar regulators. The CE pin can switch the regulator into standby
mode. In addition to a fold-back protection circuit built into conventional LDO regulators, R1171x has a thermal shutdown circuit.
Ceramic capacitors can be used.
∗) R1171S Series are suitable for automotive applications too. Please refer to our "Car Electronics Products Catalog" or contact us.
FEATURES
• Supply Current (ISS) ··················· Typ. 130μA (VIN=VSET+1.0V)
• Standby Current (Istandby) ············ Typ. 0.1μA (Same as above, In standby)
• Output Current (IOUT)·················· 2A (TO-252-5-P1), 1.5A (HSOP-6J)
• Dropout Voltage (VDIF) ··············· Typ. 0.09V (IOUT=300mA, VSET=2.8V)
• Ripple Rejection (RR)················ Typ. 50dB (f=1kHz)
• Output Voltage Accuracy ················± 2%
• Temp. coeff. of Output Voltage ·······Typ. ± 100ppm/°C
• Line Regulation·······························Typ. 0.05%/V
• Fold-back Protection Circuit ···········Current limit Typ. 200mA
• Thermal Shutdown Circuit ··············Stops at 150°C
• Packages········································HSOP-6J, TO-252-5-P1
• Input Voltage Range (VIN)·········· 2.1V to 6.0V
<
• Output Voltage Range (VOUT)····· 1.5V to 5.0V (HSOP-6J, Internally fixed)
1.8V to 5.0V (TO-252-5-P1, Internally fixed
•
Ceramic capacitor s can be used. ·····
C
C
IN=COUT=10
μ
μ
F or more (VSET 1.8V)
)
IN=COUT=4.7
F or more (VSET 1.8V)
≥
BLOCK DIAGRAMS
R1171xxx1A/C
R1171xxx1B/D
(CE pin "H" active)
(
"L" active)
CE
pin
V
DD
V
DD
VOUT
VOUT
GND
GND
GND
GND
Vref
Vref
Current Limit
Thermal Shutdown
Current Limit
Thermal Shutdown
CE
CE
SELECTION GUIDES
.
xx
.
.
: Specify the output voltage within the range of 1.5V (
in 0.1V steps.
: Specify the output voltage within the range of 1.8V (
in 0.1V steps.
.
.
15
18
.
.
) to 5.0V (
.
.
50
50
.
.
)
)
Halogen Free
Package
HSOP-6J
TO-252-5-P1
Q'ty per Reel
1,000 pcs R1171S
3,000 pcs R1171J
Part No.
.
xx
.
1
.
∗-E2-FE
yy
.
) to 5.0V (
yy
.
-
.
1$-T1-F
.
: Select the polarity of the CE pin from (
∗
.
.
A
C
.
) "L" active or (
) "L" active or (
.
B
D
.
) "H" active.
.
.
$ : Select the polarity of the CE pin from (
.
.
.
.
) "H" active.
PACKAGES (Top View)
TYPICAL CHARACTERISTIC
R1171J301x Dropout Voltage vs. Output Current
HSOP-6J
TO-252-5-P1
6
5
4
1.0
∗
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
85
25
°
°
°
C
C
C
-40
1
2
3
1
2
3
4
5
1
2
3
4
5
6
VOUT
GND∗∗
1
2
3
4
5
VOUT
or CE
CE
GND∗∗
GND∗∗
VDD
or CE
CE
NC
GND∗∗
0
250 500 750 1000 1250 1500 1750 2000
Output Current IOUT (mA)
VDD
) The tab is substrate level (GND).
∗
) The GND pin must be wired together when it is mounted on board.
∗∗
APPLICATIONS
• Power source for hand-held communication equipment, cameras, and VCRs • Power source for laptop personal computers
• Power source for home appliances and digital home appliances
• Power source for automotive application
• Power source for battery-powered equipment
No.EK-125-121001
CMOS LDO Regulator