QTS-XXX-XX-XXX-D-XXX
REVISION AA
No OF POSITIONS
OPTION
-025, -050, -075,
**-100, **-125
(PER ROW)
DO NOT
SCALE FROM
THIS PRINT
-LC: LOCKING CLIPS (SEE NOTE 10 AND NOTE 15)
(USE LC-08-TM-01)
-A: ALIGNMENT PINS (SEE NOTE 10)
(USE QTS-25-XX-D-XX-A)
** (SEE NOTE 14)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.276-.375-.005, SEE FIG. 2)
-GP: GUIDE POST, SEE FIG. 4
(AVAILABLE ON STYLE -01 ONLY)
-TR: TAPE & REEL (75 POS MAX)
(N/A ON STYLE -05 & -06)
LEAD STYLE
C1
-01: .1680[4.267]
-02: .2861[7.264]
-03: .4043[10.269]
-04: .6001[15.246]
-05: .7181[18.240]
-06: .8361[21.237]
(No OF POSITIONS / 25) x .7875[20.003] REF
.7875 20.003 REF
SEE NOTE 13
*
*
ROW SPECIFICATION
01
02
-D: DOUBLE (USE QTS-25-XX-D-XX
& QTSH-25-XX-D-XX )
.155 3.94 REF
(SEE NOTE 16)
.235 5.97
REF
No OF BANKS
PLATING SPECIFICATION
(SEE TABLE 5)
= SEE SHEET 3
.644 16.36 REF
QTS-25-XX-D-XX
* = NOT TOOLED
.0325 0.826 REF
AA
24 EQ SPACES
@ .0250[.635]
.155±.003 3.94±0.076
.0080 0.203 REF
FIG 1
.003[.08]
QTS-075-01-XXX-D-LC SHOWN
"A"
C2
.001[.03]
"A"
T-1S56-XX-XXX
(SEE NOTE 8, 9 & 12)
C3
.0550 1.397
"B" REF
SEE TABLE 2
(SEE NOTE 9 & 12)
.038 0.95 REF
.056 1.42 REF
T-1G1-XX-XXX
"A"
.037 0.94 REF
.015 0.38 REF
LC-08-TM-01
.7450 18.923 REF
.010 0.25 REF
(((No OF POSITIONS / 25) x .7875[20.003]) -.060[1.52]) .003[.08]
.280 7.11 REF
NOTES:
C
SECTION "A"-"A"
2 MAX SWAY
(TYP)
1.
REPRESENTS A CRITICAL DIMENSION.
2. DELETED.
3. DELETED.
4. MINIMUM TERMINAL RETENTION: 6 OZ.
5. MINIMUM GROUND PLANE RETENTION: 1 LB.
6. DELETED.
7. PARTS TO BE MOLDED TO POSITION.
8. MAXIMUM VARIANCE OF .002[.05].
-LC: LOCKING CLIP OPTION SHOWN
QTS-25-XX-D-XX-A
9. DIMENSION APPLIES TO TERMINALS AND GROUND PLANES INDEPENDENT OF
THE GROUND PLANE OR TERMINAL RESPECTIVELY.
10. LEAD STYLES -03 AND -05: TOP BODY (QTS) CANNOT HAVE -A OPTION AND
-04 AND -06 CAN USE EITHER -A OR -LC BODY.
11. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F.
.0375 0.953
REF
12. GROUND PLANE PRESS HEIGHT MUST BE .003[.08] LESS THAN THE MAX
HEIGHT OR .001[.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
13. WINDOW NOT PRESENT ON LEAD STYLES -02 THRU -06 HEIGHT
PER REV. E OF THE QTS-25-XX-D-XX-X-XX.
.035 0.89 REF
R
((No OF POSITIONS / 25) x .7875[20.003]) - .060[1.52] REF
.0375 0.953
REF
14. FOR NEWAPPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC
INTERCONNECT PROCESSING GROUP.
-A: ALIGNMENT PIN OPTION SHOWN
15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
16. PIN CAN EXTEND PAST WALL .003 MAX.
AA
UNLESS OTHERWISE SPECIFIED,
PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005[.13]
.XXXX: .0020[.051]
SHEET SCALE: 1:0.666667
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
H.635mm DOUBLE ROW HS TERMINAL ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
DWG. NO.
QTS-XXX-XX-XXX-D-XXX
BY:
DEAN P
09-14-2010 SHEET 1 OF 3
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-XXX-MKT.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
