Datasheet > Q120RA-AF

Q120RA-AF

更新时间： 2022-02-26 11:29:41

品牌	Logo	应用领域
邦纳 - BANNER		/
页数	文件大小	规格书
8页	430K
描述
R-GAGEÂ® Q120RA-AF Sensor

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

Q120RA-AF 数据手册

R-GAGE Q120RA-AF Sensor

Dimensions

All measurements are listed in millimeters, unless noted otherwise.

50.75

Mounting holes

Indicator LEDs

159.5

140.79

Cover for DIP switch

M12/Euro-style QD

6.5

90.8

Windows

The R-GAGE sensor can be placed behind a glass or a plastic window, but the configuration must be tested and the

distance from the sensor to the window must be determined and controlled prior to installation. There is typically a 20%

signal reduction when the sensor is placed behind a window.

Polycarbonate at 4 mm thickness performs well in most situations, but the performance depends on filler materials.

Thinner (1 to 3 mm) windows have high reflection. The amount of reflection depends on the material, thickness, and

distance from the sensor to the window.

Locate the sensor in a position of minimum reflection from the window, which will repeat every 6.1 mm of distance

between the sensor and the window. The positions of maximum reflection from the window repeat between the minimums,

and decrease in effect until the window is approximately 150 mm (5.9 in) away. Consult the factory for pre-tested window

materials which can be used at any distance without issue.

Additionally, the face of the window should be protected from flowing water and ice by use of a flow diverter or hood

directly above the window. Falling rain or snow in the air in front of the window, light water mist, or small beads on the

face of the window are typically not an issue. However, a thick, continuous surface of water or ice directly on the face of

the window can be detected as a dielectric boundary.

Wiring

Wiring Key:

12-30V dc

1 = Brown

–

2 = White

Load 1

Load 2

3 = Blue

4 = Black

shield (QD cordset)

5 = Gray (Do not connect)

NOTE: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dc

common. Shielded cordsets are recommended for all QD models.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 169605 Rev. E

1...3 4 567 8

下载PDF

与Q120RA-AF相关器件

型号	品牌	描述	获取价格	数据表
Q120RA-AF2	BANNER	R-GAGEÂ® Q120RA-AF2 Sensor	获取价格
Q120RA-AF2W	BANNER	R-GAGEÂ® Q120RA-AF2W Sensor	获取价格
Q120RA-EU-AF	BANNER	R-GAGEÂ® Q120RA-AF Sensor	获取价格
Q120RA-EU-AF2	BANNER	R-GAGEÂ® Q120RA-AF2 Sensor	获取价格
Q120RA-EU-AF2W	BANNER	R-GAGEÂ® Q120RA-AF2W Sensor	获取价格
Q120RA-KR-AF	BANNER	R-GAGEÂ® Q120RA-AF Sensor	获取价格