Make sure the next
Card you purchase
has...
TM
PW-82520R
RADIATION TOLERANT 3-PHASE DC
MOTOR TORQUE CONTROLLER
FEATURES
• Self-Contained 3-Phase Motor
Controller
• Operates as Current or Voltage
Controller
• 1, 3 and 10 Amp Output Current
• Radiation Tolerant
Total Dose: 100 Krads
SEU: > 100 MeV/mg/cm2
• 1.5% Linearity
• 3% Current Regulating Accuracy
• User-Programmable Compensation
• 10 KHz - 100 KHz PWM Frequency
• Complementary Four-Quadrant
Operation
DESCRIPTION
• Holding Torque through Zero Current
• Cycle-by-Cycle Current Limit
The PW-82520R (100Vdc) is a high performance radiation tolerant
current regulating torque loop controller designed to accurately regu-
late the current in the motor windings of 3-phase brushless DC and
brush DC motors.
• Non-Radiation Tolerant versions of
this product are also available
(see PW-82520/21N data sheet)
The PW-82520R is a completely self-contained motor controller that
converts an analog input command signal into motor current and
uses the signals from Hall-effect sensors in the motor to commutate
the current in the motor windings. The motor current is internally
sensed and processed into an analog signal. The current signal is
summed together with the command signal to produce an error sig-
nal that controls the pulse width modulation (PWM) duty cycle of the
output, thus controlling the motor current. The PW-82520R perform-
ance can be tuned by utilizing the internal error amplifier and the
external Proportional/Integral (PI) regulator network components to
match motor characteristics.
APPLICATIONS
The PW-82520R is ideal for space and radiation tolerant applications
requiring current regulation and/or holding torque at zero input com-
mand. System applications that can use the PW-82520R are: pumps,
actuators, antenna position, environmental control and
reaction/momentum wheel systems using brushless and brush
motors. Available in a 1 and 3 amp small DIP-style and a 10 amp flat-
pack hybrid package, the PW-82520R is suitable for applications with
limited printed circuit board area.
FOR MORE INFORMATION CONTACT:
Technical Support:
1-800-DDC-5757 ext. 7677 or 7381
Data Device Corporation
105 Wilbur Place
Bohemia, New York 11716
631-567-5600 Fax: 631-567-7358
www.ddc-web.com
©
2001 Data Device Corporation