PSPDF‐480 SERIES
Up to 528 Watts, AC/DC Switching Power Supplies
Rev A
Wall Industries, Inc.
FEATURES
RoHS Compliant
Up to 528 Watts Output Power
3000VAC I/O Isolation
Built‐in Constant Current Limiting Circuit (<20A)
Using ZVS Technology to Reduce Power Dissipation
Conformal Coating on Both Sides of PCB
High Efficiency up to 90%
1U Low Profile, 41mm
Built‐in DC OK Signal
‐30°C to +70°C Wide Operating Temperature Range
Universal Input Voltage Range: 90‐264VAC
Protections: OLP / OTP / OVP / SCP
Built‐in Remote Sense Function
Built‐in Fan Speed Control
Built‐in Active PFC Function
12V, 24V, 27V, 36V, & 48VDC Single Output Models
UL60950‐1 (2nd edition), IEC60950‐1:2005 (2nd edition),
EN60950‐1:2006 Safety Approvals
DESCRIPTION
The PSPDF‐480 series of AC/DC switching power supplies provides up to 528 Watts of output
power in a 8.58” x 4.59” x 1.61” enclosed case with built‐in fan. This series consists of single
output models ranging from 12VDC to 48VDC with an input voltage range of 90~264VAC.
Standard features include high efficiency up to 90%, 3000VAC I/O isolation, and a ‐30°C to +70°C
operating temperature range. This series also has short circuit, over load, over voltage, and over
temperature protection. All models are RoHS compliant and have UL60950‐1 (2nd edition),
IEC60950‐1:2005 (2nd edition), and EN60950‐1:2006 safety approvals.
E232347
Size:
8.58 x 4.59 x 1.61 inches
218.0 x 116.5 x 41.0 mm
Weight:
3.2 lbs (1450g)
MODEL SELECTION TABLE
Output Current
Ripple & Noise (1)
Model Number
Input Voltage Range
90 ~ 264 VAC
Output Voltage
Output Power
Efficiency
Min
Max
‐30°C ~ 0°C
0°C ~ +70°C
PSPDF‐480‐12
PSPDF‐480‐24
PSPDF‐480‐27
PSPDF‐480‐36
PSPDF‐480‐48
12 VDC
24 VDC
27 VDC
36 VDC
48 VDC
0A
34A
180mVp‐p
150mVp‐p
150mVp‐p
150mVp‐p
200mVp‐p
120mVp‐p
408W
528W
486W
504W
528W
88%
89%
89%
90%
90%
0A
0A
0A
0A
22A
18A
14A
11A
150mVp‐p
150mVp‐p
150mVp‐p
200mVp‐p
NOTES
1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair‐wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. The power supply is considered a component which will be installed into final equipment. The final equipment must be re‐confirmed that it still
meets EMC directives.
DERATING CURVE
100
80
60
40
20
-30
0
10
20
30
40
50
60
70
Ambient Temperature (°C)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603‐778‐2300 • Toll Free: 888‐597‐9255 • Fax 603‐778‐9797
website: www.wallindustries.com • e‐mail: sales@wallindustries.com
11/04/2014
Page 1 of 3