PI6C3612-1
Low Power Spread Spectrum Frequency
Multiplier SSCG-GP Family
Features
• 10 to 40MHz input frequency range
Description
The PI6C3612-1 is a Low Power Spread Spectrum Frequency
Multiplier and part of the Pericom SSCG-GP family. The part
generates one 2x modulated output from a single clock source or
a crystal, and is designed to reduce electromagnetic interference
(EMI) by spreading the clock. This reduction in EMI can result
in significant system cost saving and less design complexity
by reducing the number of circuit board layers ferrite beads
and shielding. In the absence of a spread spectrum clock, other
EMI-reducing components are required in order to comply with
regulatory agency requirements.
• 2x frequency multiplication
•
Operating voltages of 2.5 V or 3.3V
• Selectable Spreading Ratio : -0.40%, -0.80%, ±0.20%, ±0.40%
and 0% typical at 14MHz/28MHz input
• Modulation Rate: Fin /320(10 MHz≤ Fin ≤20 MHz)
Fin /640(20 MHz≤ Fin ≤40 MHz)
• Low power dissipation
• Low jitter
The 2x frequency multiplication output can reduce the system
design complexity by eliminating higher frequency order
crystals. This reduction in system complexity can result in
faster design time, cost saving, higher system accuracy and
performance.
• 8−pin SOIC & TSSOP Packages
Applications
The PI6C3612-1 can be used in most multimedia applications
and embedded systems including but not limited to the
following:
The Spreading Ratio is selectable using the selection pins.
The PI6C3612-1 provides -0.40%, -0.80%, ±0.20%, ±0.40%
diversified and 0% spread modulation through external logic
stage setting.
• PDAs
• DSCs
• Printers/ MFPs
The chip is packaged in the 8-pin SOIC. The reduced size of the
package outline can save precious board space and make layout
easier.
• Media players
• Portable-TVs
• Embedded digital video devices
• CD-ROM, VCD and DVD players
• LCD Panel Modules
• Automotive components
• Networking devices
PI6C3612-1 is one of the clock products provided by Pericom.
If your application needs a clock product with a different
specification not currently provided, please contact us for further
information or custom design.
Benefits
Reduction in EMI
System cost saving
Reduced system complexity
Faster tme to market
Block Diagram
Pin Configuration
S2
FSEL
VCO
S1
X1
X2
/CLKIN
GND
S1
CLKOUT
1/K
PFD
/CP
LPF
Modulation
1/N
1/M
8 Pin
SOIC
X’TAL
OSC
VDD
FSEL
CLKOUT
S2
PS8909A
08/28/07
1
07-0187