PEX8603, PCI Express Gen 2 Switch, 3 Lanes, 3 Ports
The ExpressLane™ PEX8603 device offers PCI Express switching capability
enabling users to add scalable high bandwidth non-blocking interconnection
to a wide variety of applications including control plane applications,
consumer applications and embedded systems. The PEX8603 is well suited
for fan-out and peer-to-peer applications.
Highlights
. PEX8603 General Features
o 3-lane, 3-port PCIe Gen2 switch
. Integrate 5.0 GT/s SerDes
o 10 x 10mm2, 136-pin QFN
package
o Typical Power: 0.7 Watts
Low Packet Latency & High Performance
The PEX8603 architecture supports packet cut-thru with a maximum latency of
250ns in x1 to x1 configuration. This, combined with low power consumption
and non-blocking internal switch architecture, provides full line rate on all ports
for low-power applications such as consumer and embedded. The low latency
enables applications to achieve high throughput and performance. In addition to
low latency, the device supports a max payload size of 256 bytes.
. PEX8603 Key Features
o Standards Compliant
. PCI Express Base Specification, r2.1
(backwards compatible w/ PCIe
1.0a/1.1)
. PCI Power Management Spec, r1.2
. Microsoft Windows 7 Compliant
. Dynamic SerDes speed control
o High Performance
. Non-blocking switch fabric
. Full line rate on all ports
. Packet Cut-Thru with 250ns max
packet latency (x1 to x1)
Data Integrity
The PEX8603 provides end-to-end CRC protection (ECRC) and Poison bit
support to enable designs that require guaranteed error-free packets. PLX also
supports data path parity and memory (RAM) error correction as packets pass
through the switch.
. 256B Max Payload Size
o Flexible Configuration
. Ports configurable as x1, x2
. Registers configurable with strapping
pins, EEPROM, I2C, or host software
. Reference Clock Buffered Output
signals for downstream ports
Power Management and Reference Clock Buffers
The PEX8603 supports the following power management states: L0, L0s, L1,
L2/L3 Ready, L2 and L3. Moreover, the PEX8603 supports Vaux along with the
external signal WAKE# and the in-band Beacon for the PCIe endpoints to use to
inform the system host to exit the low power savings mode.
. Lane and polarity reversal
. Compatible with PCIe 1.0a PM
o Quality of Service (QoS)
. Eight traffic classes per port
. Round-robin source port arbitration
. Relaxed PCI Ordering
The PEX 8603 supports two pairs of buffered, 100 MHz HCSL output clocks,
one pair for each downstream port of the switch. Each clock output pair can be
disabled by software or serial EEPROM when not in use, for additional power
savings. This feature greatly reduces system BOM cost by eliminating the need
for extra clock buffers on the PCB.
o Reliability, Availability,
Serviceability
. visionPAK™
•
•
•
•
Per Port Performance Monitoring
Per port payload & header counters
SerDes Eye Capture
Interoperability
The PEX8603 is designed to be fully compliant with the PCI Express Base
Specification r2.1 and is backwards compatible to PCI Express Base
Specification r1.1 and r1.0a. Additionally each port supports auto-negotiation and
polarity reversal. Furthermore, the PEX8603 is designed for Microsoft Windows
7 compliance. All PLX switches undergo thorough interoperability testing in
PLX’s Interoperability Lab and compliance testing at the PCI-SIG plug-fest to
ensure compatibility with PCI Express devices in the market.
Error Injection and Loopback
. All ports hot plug capable thru I2C
(Hot-Plug Controller on every port)
. Data Path parity
. Memory (RAM) Error Correction
signals
. INTA# and FATAL_ERR#
. Advanced Error Reporting
. Port Status bits and GPIO available
. Per port error diagnostics
. JTAG AC/DC boundary scan
Device Operation Configuration Flexibility
o Power Management
. WAKE#, Beacon, Vaux support
The PEX8603 provides several ways to configure its operations. The device can
be configured through strapping pins, I2C interface, CPU configuration cycles
and/or an optional serial EEPROM. This allows for easy debug during the
development phase and functional monitoring during the operation phase.
© PLX Technology, www.plxtech.com
Page 1 of 3
8/17/2011, Version 1.1
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
