Datasheet > PD040QX2

PD040QX2

更新时间： 2022-06-19 15:55:46

品牌	Logo	应用领域
AZDISPLAYS		/
页数	文件大小	规格书
34页	1215K
描述
color TFT LCD module

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PD040QX2 数据手册

P-511-638(V:3)

PD040QX2

15. Handling Cautions

15-1) Mounting of module

a)Please power off the module when you connect the input/output connector.

b)Polarizer which is made of soft material and susceptible to flaw must be handled carefully.

c)Protective film (Laminator) is applied on surface to protect it against scratches and dirt.

d)Please following the tear off direction as figure 15-1 to remove the protective film as slowly as

possible, so that electrostatic charge can be minimized.

15-2) Precautions in mounting

a)When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft

dry cloth.

b)Wipe off water drops or finger grease immediately. Long contact with water may cause

discoloration or spots.

c)TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard

surface. Please handle with care.

d)Since CMOS LSI is used in the module. So take care of static electricity and earth yourself

when handling.

15-3) Adjusting module

a)Adjusting volumes on the rear face of the module have been set optimally before shipment.

b)Therefore, do not change any adjusted values. If adjusted values are changed, the

specifications described may not be satisfied.

15-4) Others

a)Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours.

b)Store the module at a room temperature place.

c)The voltage of beginning electric discharge may over the normal voltage because of

leakage current from approach conductor by to draw lump read lead line around.

d)If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.

Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash

it out immediately with soap.

e)Observe all other precautionary requirements in handling general electronic components.

f)Please adjust the voltage of common electrode as material of attachment by 1 module.

15-5) Polarizer mark

The polarizer mark is to describe the direction of view angle film how to mach up with the rubbing

direction.

The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced,

or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. PAGE:30

1...27 28 293031 32 33 34

下载PDF

与PD040QX2相关器件

型号	品牌	描述	获取价格	数据表
PD-04A200	VISHAY	Plasma Panel Displays 4 Character, 16 Segment Alphanumeric Display with 2.00" [50.80mm] Hi	获取价格
PD-04A200-2	VISHAY	Plasma Panel Displays 4 Character, 16 Segment Alphanumeric Display with 2.00" [50.80mm] Hi	获取价格
PD05	EDI	SINGLE-PHASE FULL WAVE BRIDGE 1.5AMPERES THROUGH 5.0 AMPERES FOR P.C. BOARD AND POWER TERM	获取价格
PD050QT2	AZDISPLAYS	TECHNICAL SPECIFICATION	获取价格
PD050QX2	AZDISPLAYS	TECHNICAL SPECIFICATION	获取价格
PD050VL1	AZDISPLAYS	TECHNICAL SPECIFICATION	获取价格