OXFW911
IEEE1394 to ATA/ATAPI Native Bridge
Data Sheet
FEATURES
·
S400 (50 Mbytes/s) compliant 1394-1995 Link and
Transaction layers
·
·
·
High performance ATA command translation in
firmware using Reduced Block Command (RBC) set
Integrated 32-bit RISC processor (ARM7TDMI) with
on-chip scratch RAM
Optional External Serial ROM interface for
configuration data, user serial number, etc.
Integrated 512kb Flash memory
Blank Flash memory programming feature via 1394
bus
Firmware and Flash Programming Utilities supplied by
Oxford Semiconductor
·
·
Compatible with 1394-1995 and 1394A Phys.
Microsoft Win98-Second Edition, Win2000 and Apple
MacOS generic driver support
SBP-2 Target Revision 4 compliant interface
Fully ATA-5 compliant (see T13-1321D)
·
·
·
·
·
·
·
Support for UDMA5 (ATA100)
Sustained data transfer of 35 MB/s
Supports PIO modes 0 to 4, DMA modes 0 to 2 and
Ultra DMA modes 0 to 5
·
·
·
·
3.3 Volts operation
Low Power CMOS
Ultra-thin 128-TQFP package (14 x 14 x 1 mm)
·
·
ORB co-processor to accelerate translation of ORBs
to ATAPI commands
Supports ORB chaining for increased performance
DESCRIPTION
The OXFW911 is
a
high-performance 1394 to
automatically storing them and passing them to the
appropriate destinations, without any intervention from the
processor. It also provides storage and manages the
sequencing of ORB fetching to reduce latency and improve
data throughput.
ATA/ATAPI (IDE) native bridge with an integrated target
Serial Bus Protocol (SBP-2 ) controller. By supporting
the SBP-2 protocol, the device can use generic SBP-2
drivers available in the Microsoft Windows 98SE, Microsoft
Windows 2000, Microsoft Millennium and Apple MacOS
(8.4 to 9.04) operating systems. MacOS support also
includes booting from Firewire disk.
The configuration data including the IEEE OUI
(Organisational Unique Identifier) and device serial number
is stored in the Flash ROM which may be uploaded from
the 1394 bus, even when blank. The device also facilitates
firmware uploads from the 1394 bus.
The device is ideally suited for smart-cable or tailgate
interface applications for removable-media drives, compact
flash card readers, CD-ROM, CD-R, CD-RW, DVD-ROM,
DVD-RAM and hard disk drives, allowing IDE drives to be
connected to a 1394 serial bus in a plug-and-play fashion.
Both ATA and ATAPI devices are supported using the
same firmware.
The ORB co-processor translates ORBs as defined in the
SBP-2 protocol into ATA/ATAPI commands, and
automatically stores error/status messages at an address
specified by the host.
This highly integrated device offers a two-chip solution to
native bridge applications using an external 1394 PHY. The
device is compatible with both 1394-1995 and 1394A
PHYs.
Concurrent operation of the ATA/ATAPI and 1394
interfaces are facilitated using the high throughput buffer
manager where LINK, ATAPI manager and ARM7TDMI
can perform interleaved accesses to the on-chip RAM
buffer. The high performance processor ensures that no
significant latency is incurred. The ATA command
translation is performed in firmware to meet RBC (Reduced
Block Commands) standard, T10-1228D. The ATA/ATAPI
Manager supports PIO modes 0 to 4, DMA modes 0 to 2
and Ultra DMA mode 0 to 5 and provides the interface to
the IDE bus. It is compliant with T13-1321D, ATA-5
specification, as well as support for ATA100.
The LINK controller complies with 1394-1995 and 1394A
specifications. The 1394 transaction layer and SBP-2
protocol is implemented using
a combination of the
ARM7TDMI (low-power 32-bit RISC processor), an ORB
(Operational Request Block) hardware co-processor and a
high performance buffer manager.
The buffer manager has a RAM bandwidth of 800Mbps. It
provides storage for 1394 and ATA/ATAPI packets,
Oxford Semiconductor Ltd.
25 Milton Park, Abingdon, Oxon, OX14 4SH, UK
Tel: +44 (0)1235 824900
Ó Oxford Semiconductor 2001
OXFW911 Data Sheet Revision 1.1 – Mar 2001
Part No. OXFW911-TQ-A
Fax: +44(0)1235 821141
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
