Datasheet > OPA727AIDGKTG4

OPA727AIDGKTG4

更新时间： 2024-01-17 03:37:31

品牌	Logo	应用领域
德州仪器 - TI		电子
页数	文件大小	规格书
28页	1017K
描述
e-trim 20MHz, High Precision CMOS

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

OPA727AIDGKTG4 技术参数

是否Rohs认证：	符合	生命周期：	Active
零件包装代码：	MSOP	包装说明：	VSSOP-8
针数：	8	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.33.00.01
风险等级：	3.98	放大器类型：	OPERATIONAL AMPLIFIER
架构：	VOLTAGE-FEEDBACK	最大平均偏置电流 (IIB)：	0.0005 µA
25C 时的最大偏置电流 (IIB)：	0.0001 µA	最小共模抑制比：	86 dB
标称共模抑制比：	100 dB	频率补偿：	YES
最大输入失调电流 (IIO)：	0.0001 µA	最大输入失调电压：	300 µV
JESD-30 代码：	R-PDSO-G8	JESD-609代码：	e4
长度：	3 mm	低-偏置：	YES
低-失调：	YES	微功率：	NO
湿度敏感等级：	2	负供电电压上限：	-6.6 V
标称负供电电压 (Vsup)：	-5 V	功能数量：	1
端子数量：	8	最高工作温度：	125 °C
最低工作温度：	-55 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装等效代码：	TSSOP8,.19
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
包装方法：	TR	峰值回流温度（摄氏度）：	260
功率：	NO	电源：	+-2/+-6/4/12 V
可编程功率：	NO	认证状态：	Not Qualified
座面最大高度：	1.1 mm	标称压摆率：	30 V/us
子类别：	Operational Amplifier	最大压摆率：	6.5 mA
供电电压上限：	6.6 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	MILITARY	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
标称均一增益带宽：	20000 kHz	最小电压增益：	63100
宽带：	NO	宽度：	3 mm
Base Number Matches：	1

OPA727AIDGKTG4 数据手册

OPA727, OPA2727

OPA4727, OPA728

SBOS314H–SEPTEMBER 2004–REVISED APRIL 2007

e-trim™ 20MHz, High Precision CMOS

Operational Amplifier

FEATURES

DESCRIPTION

•

OFFSET: 15µV (typ), 150µV (max)

DRIFT: 0.3µV/°C (typ), 1.5µV/°C (max)

BANDWIDTH: 20MHz

The OPA727 and OPA728 series op amps use a

state-of-the-art 12V analog CMOS process and

e-trim, a package-level trim, offering outstanding dc

precision and ac performance. The extremely low

offset (150µV max) and drift (1.5µV/°C) are achieved

by trimming the IC digitally after packaging to avoid

the shift in parameters as a result of stresses during

package assembly. To correct for offset drift, the

OPA727 and OPA728 family is trimmed over

temperature. The devices feature very high CMRR

and open-loop gain to minimize errors.

SLEW RATE: 30V/µs

BIAS CURRENT: 500pA (max)

LOW NOISE: 6nV/√Hz at 100kHz

THD+N: 0.0003% at 1kHz

QUIESCENT CURRENT: 4.3mA/ch

SUPPLY VOLTAGE: 4V to 12V

SHUTDOWN MODE (OPA728): 6µA

Excellent ac characteristics, such as 20MHz GBW,

30V/µs slew rate and 0.0003% THD+N make the

OPA727 and OPA728 well-suited for communication,

high-end audio, and active filter applications. With a

bias current of less than 500pA, they are well suited

for use as transimpedance (I/V-conversion)

amplifiers for monitoring optical power in ONET

applications.

APPLICATIONS

•

OPTICAL NETWORKING

TRANSIMPEDANCE AMPLIFIERS

INTEGRATORS

ACTIVE FILTERS

A/D CONVERTER DRIVERS

I/V CONVERTER FOR DACs

HIGH PERFORMANCE AUDIO

PROCESS CONTROL

Optimized for single-supply operation up to 12V, the

input common-mode range extends to GND for true

single-supply functionality. The output swings to

within 150mV of the rails, maximizing dynamic range.

The low quiescent current of 4.3mA makes it

well-suited for use in battery-operated equipment.

The OPA728 shutdown version reduces the

quiescent current to typically 6µA and features a

reference pin for easy shutdown operation with

standard CMOS logic in dual-supply applications.

TEST EQUIPMENT

OPAx727 AND OPAx728 RELATED PRODUCTS

FEATURES

PRODUCT

20MHz, 3mV, 4µV/°C

OPA725

(non-e-trim version of OPA727)

For ease of use, the OPA727 and OPA728 op amp

families are fully specified and tested over the supply

range of 4V to 12V. The OPA727 (single) and

OPA728 (single with shutdown) are available in

MSOP-8 and DFN-8; the OPA2727 (dual) is

available in DFN-8 and SO-8; and the quad version

OPA4727 in TSSOP-14. All versions are specified for

operation from –40°C to +125°C.

20MHz, 3mV, 4µV/°C, Shutdown

(non-e-trim version of OPA728)

OPA726

+12V

OPA727

V_OUT

-V_B

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

e-trim is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

12 3 4 5 6 7...28

下载PDF

与OPA727AIDGKTG4相关器件

型号	品牌	描述	获取价格	数据表
OPA727AIDRBR	TI	OP-AMP, 150uV OFFSET-MAX, 20MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, SON-8	获取价格
OPA727AIDRBRG4	TI	OP-AMP, 150uV OFFSET-MAX, 20MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, SON-8	获取价格
OPA727AIDRBT	TI	e-trim 20MHz, High Precision CMOS	获取价格
OPA727AIDRBTG4	TI	e-trim 20MHz, High Precision CMOS	获取价格
OPA728	TI	e-trim 20MHz, High Precision CMOS	获取价格
OPA728	BB	20MHz, High Precision CMOS Operational Amplifier	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

OPA727AIDGKTG4

OPA727AIDGKTG4 技术参数

OPA727AIDGKTG4 数据手册

与OPA727AIDGKTG4相关器件

与OPA727AIDGKTG4相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

OPA727AIDGKTG4

OPA727AIDGKTG4 技术参数

OPA727AIDGKTG4 数据手册

与OPA727AIDGKTG4相关器件

与OPA727AIDGKTG4相关文章

您还可以找

您在本页遇到什么问题？