12 Watt Light Ring on
®
OptoTherm Linear Heat
Spreader
OPA730 Series
Features:
OPA730_
•
•
•
•
•
12, 1 waƩ LEDs per ring
Mono-color per ring (Blue, Green, Red, Yellow, White)
Two component beam angle opƟons (120° or 40°)
Universal connector (Tyco 2-292173-2 mates with 173977-2)
RoHS Compliant
OPA730_D
Description:
The OPA730 Series are designed for areas where light output and reliability are essenƟal. The light beam angles of 40° and
120° are ideal for illuminaƟng small and medium size areas while requiring minimal space.
A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipaƟon of any light assembly in the industry.
OptoTherm® is designed to be the opƟmum material for distribuƟon of heat for high power devices.
For custom colors and design contact your OPTEK representaƟve.
Electrical / OpƟcal CharacterisƟcs: TA=25°C, IF=700mA
Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle
Color
Yellow
Blue
Dominant Wavelength
587 nm
OPA730Y
OPA730B
15.0
21.6
21.6
15.0
21.6
15.0
21.6
21.6
15.0
21.6
420
108
576
312
576
420
108
576
312
576
470nm
OPA730G
OPA730R
120°
40°
Green
Red
530 nm
625 nm
OPA730W
OPA730YD
OPA730BD
OPA730GD
OPA730RD
OPA730WD
White
Yellow
Blue
6500°K
587 nm
470 nm
Green
Red
530 nm
625 nm
White
6500°K
DO NOT LOOK DIRECTLY AT LED WITH
UNSHIELDED EYES OR DAMAGE TO RETINA
MAY OCCUR.
RoHS
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 09/2016 Page 1
© TT electronics plc