Accessories
Specifications
Model
Appearance
EtherCAT junction slaves 3 ports
GX-JC03
Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%)
Current consumption: 0.08 A
6 ports
GX-JC06
Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%)
Current consumption: 0.17 A
Industrial switching hubs
(for EtherNet/IP and
Ethernet)
Quality of Service (QoS):
EtherNet/IP control data priority.
Failure detection:
Broadcast storm and LSI error detection
10/100 BASE-TX, Auto-Negotiation
Current consumption: 0.22 A
3 ports
W4S1-03B
W4S1-05B
W4S1-05C
Power supply connector included
5 ports
Power supply connector included
5 ports
Power supply connector and connector for informing
error included
SD memory card
DIN track
2 GB
4 GB
HMC-SD291
HMC-SD491
Length: 0.5 m; height: 7.3 mm
Length: 1 m; height: 7.3 mm
Length: 1 m; height: 16 mm
PFP-50N
PFP-100N
PFP-100N2
PFP-M (2 pcs)
End plate to secure the units on the DIN rail
Battery for NX/NJ CPU unit
CJ1W-BAT01
End cover
End cover for NX1P CPU unit
(Provided with the CPU unit)
End cover for EtherCAT communication coupler unit
NX-END02
NX-END01
(Provided with the EtherCAT communication coupler unit)
Computer software
Specifications
Sysmac Studio Lite Edition version 1.17 or higher
Model
SYSMAC-LE@@@@
*1
*2
*1.
Same functionality and supported devices than Sysmac Studio Standard Edition except for controller. The Lite Edition only supports the NJ1 and NX1P machine
controllers.
Refer to the Sysmac Studio datasheet (Cat. No. SysCat_I181E) for detailed information or contact your OMRON representative.
*2.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. SysCat_I179E-EN-02
NX1P series machine controller
69