NT3966
TFT LCD Source Driver
Power on/off sequence:
This IC is a high-voltage LCD driver, so it may be damaged by a large current flow when an incorrect power sequence is used.
The recommended sequence should be: digital power (Vcc&GND)èlogic signalsèanalog power (AVDD&AVSS) èGamma
correction reference voltage(V1~V10). Reverse this sequence to shut down, or turn off all signals and power simultaneously.
Relationship between the order of input data and output channels
(1) SHL=”1”, Start pulse from DIO1, shift right
Output
Order
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
- - -
--à
- - -
OUT420
Last data
D55~D50
First data
Data D05~D00 D15~D10 D25~D20 D35~D30 D45~D40 D55~D50
(2) SHL=”0”, Start pulse from DIO2, shift left
Output OUT415 OUT416 OUT417 OUT418 OUT419 OUT420
- - -
--à
- - -
OUT6
Last data
D55~D50
Order
First data
Data D05~D00 D15~D10 D25~D20 D35~D30 D45~D40 D55~D50
Relationship between input data and output voltage
The figure below shows the relationship among the input data and the output voltage and the polarity. The range of V1~V5 is
for positive polarity, and V6 ~ V10 for negative polarity. Please refer to the following page to get the relative resistor value and
voltage calculation method.
Gamma correction diagram
Vout
AVDD
V1
V2
Positive polarity
V3
V4
V5
Vcom
V6
V7
V8
Negative polarity
V9
V10
AVSS
08H
00H
10H
18H
20H
28H
30H
38H
3FH
Remark:AVDD-0.1 > V1 > V2 > V3 > V4 > V5; V6> V7 > V8 > V9 > V10 >AVSS+0.1V
Version 1.0
4
DEC 7 ,2001