Crystal Oscillator
Temperature Compensated Crystal Oscillator (TCXO)
NT2016S Series(with two outputs of same frequency)
NT2016SC
Main Application
■
For mobile phones, etc.
Features
■
● Supports low power supply voltage. (Supports DC +1.7 V to +3.3 V.)
● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm3, and 0.008 g, respectively.
● A surface-mount crystal oscillator. (Reflow soldering is possible.)
● Lead-free. Meets the requirements for re-flow profiling using lead-free solder.
● With Enable / Disable function (This function can be used for both output1 and 2).
● It is possible to choose the AFC function instead of the Enable/Disable function for
output 2.
Specifications
■
• Frequency setting conditions
1. Frequencies are set at normal temperatures (+25±2 °C).
Model
NT2016SC
Item
Nominal Frequency Range (MHz)
Standard Frequency (MHz)
Supply Voltage [VCC] (V)
Load Impedance
13 to 52
38.4
• If you require a product with a different frequency,
power supply voltage, frequency control range, etc.
to the standard specifications, please contact us with
your enquiries.
26
52
+1.8
10 kΩ//10 pF
Max. 2.2
Current Consumption (mA) (Two outputs)
Output Voltage
Max. 2.0
Max. 2.4
*1. A DC-cut capacitor is not embedded in this crystal
oscillator. Connect a DC-cut capacitor (1,000 pF) to
the line-out terminal of the oscillator.
Min. 0.8 V(p-p) (DC Coupling *1)
Max. ±2.0×10–6 (Max. ±0.5×10–6 available)
–30 to +85
Frequency/Temperature Characteristics
Operating Temperature Range (°C)
Storage Temperature Range (°C)
Frequency/Voltage Coefficient
Frequency/Load Coefficient
–40 to +85
Max. ±0.1×10–6/+1.8 V±5 %
Max. ±0.1×10–6/(10 kΩ//10 pF) ±10 %
Max. ±1.0×10–6/year
Long-term Frequency Stability
Dimensions
List of Ordering Codes
■
■
Frequency
Ordering Code
(MHz)
mm
#6
#1
#5
#4
#3
Terminal land connections
26
NT2016SC-26M-NSA3502B
NT2016SC-38.4M-NSA3502C
NT2016SC-52M-NSA3502D
Control Voltage (Enable/
Enable/Disable input or
DiAsaFbClef)orfooruotpuutpt2ut2
#1
38.4
52
#2
#3
#4
Output2 (Analog)
GND
Output1 (Analog)
The above frequencies are NDK’s standard frequencies.
Frequencies other than the above are available.
Feel free to contact our sales representatives.
#2
2.±±±.1
Control Voltage (Enable/
Enable/Disable input
Disabfoler)ofuotrpuotu1tput1
#5
#6
VCC
1.2±±.±5
#2
#1
#6
#3
#4
(±.5)
#5
±.5
(±.6)
(1.2)
(±.6)
±.4±±.1
1510B_NT2016SC_e
- 1 -