NCP4413, NCP4414
3 A High-Speed MOSFET
Drivers
The NCP4413/4414 are 3 A CMOS buffer/drivers. They will not
latch up under any conditions within their power and voltage ratings.
They are not subject to damage when up to 5 V of noise spiking of
either polarity that occurs on the ground pin. They can accept,
without damage or logic upset, up to 500 mA of current of either
polarity being forced back into their output. All terminals are fully
protected against up to 4 kV of electrostatic discharge.
http://onsemi.com
MARKING
DIAGRAM
As MOSFET drivers, the NCP4413/4414 can easily switch
1800 pF gate capacitance in 20 nsec with matched rise and fall times,
and provide low enough impedance in both the ON and the OFF
states to ensure the MOSFET’s intended state will not be affected,
even by large transients. The rise and fall time edges are matched to
allow driving short–duration inputs with greater output accuracy.
8
SO–8
D SUFFIX
CASE 751
NCP
441x
YWWXZ
8
1
1
8
Features
NCP441x
YYWWXZ
CO
• Latch–up Protected: Will Withstand 500 mA Reverse Current
• Input Will Withstand Negative Inputs Up to 5 V
• ESD Protected (4 kV)
PDIP–8
P SUFFIX
CASE 626
8
1
1
• High Peak Output Current (3 A)
x
= Device Number (3 or 4)
• Wide Operating Range (4.5 V to 16 V)
• High Capacitive Load Drive Capability (1800 pF in 20 nsec)
• Short Delay Time (35 nsec Typ)
• Consistent Delay Times with Changes in Supply Voltage
• Matched Delay Times
YY, Y = Year
WW, W = Work Week
X
Z
= Assembly ID Code
= Subcontractor ID Code
= Country of Origin
CO
• Low Supply Current
ORDERING INFORMATION
With Logic “1” Input (500 mA)
With Logic “0” Input (100 mA)
Device
Package
Shipping
• Low Output Impedance (2.7 W)
NCP4413DR2
Inverting
SO–8
2500 Tape & Reel
NCP4413P
Inverting
PDIP–8
SO–8
50 Units/Rail
2500 Tape & Reel
50 Units/Rail
Functional Block Diagram
V
DD
NCP4414DR2
Non–Inverting
NCP4413
INVERTING
OUTPUTS
NCP4414P
PDIP–8
Non–Inverting
300 mV
OUTPUT
NONINVERTING
OUTPUTS
INPUT
NCP4414
4.7 V
GND
EFFECTIVE
INPUT
C = 10 pF
Semiconductor Components Industries, LLC, 2002
1
Publication Order Number:
August, 2002 – Rev. 1
NCP4413/D