FID-550 SERIES
■ DIMENSION EXAMPLE (10.4” SHOWN)
2.0
±
243.80
236.80
(3.50)
±1.0
(11.50)
217.10 (transparent area)
215.10
213.10 (input area)
±1.0
123.75
±1.0
Top
(8.00)
Left
Unit: mm
Bottom
■ DETAILED SPECIFICATION
■ 1.0 APPLICATION
This specification applies to the 10.4" (inch) standard Touch Panel (Pen/Finger type). P/N is N010-0550-T611.
■ 2.0 ADDITIONAL APPLICATIONS
Control IC specifications and Control PCB, complete Touch Panel Specifications are also applicable.
■ 3.0 DISCRIPTION AND BLOCK DIAGRAM
This panel in combination with a control IC chip is used to transfer the co-ordinates of the touched position to
the host system (see block diagram above).
■ 4.0 DRAWING (Please see the diagram above.)
Definitions of the major dimensions indicated on this diagram:
A
Effective Input Area (A)
Area guaranteed to meet all the
characteristics detailed in this specification
View / Transparent Area (B) The area inside the adhesive zone
B
or electrode pattern.
Anti-input Area (C)
An insulating area allowed to protect
the touch panel from giving false
readings when an enclosure touches
the panel.
C
■ 5.0 CHARACTERISTICS
■ 5.1 MECHANICAL
Operating Force
Force
0.05~0.49 N (5 ~ 50gF) Measured with
a Silicon Measurement Rod R 8
(Round type 8mm) Silicon Rubber
Hardness 60˚C
Hardness of Surface Pencil hardness 3H minimum against
specification JIS K-5400
Silicon Rubber Rod
■ 5.2 OPTICAL
Transparency
78% min measured in the effective input area to JIS K 7105 using a
MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter. Typically 80%.
5% measured in the effective input area using a MURAKAMI
SHIKISAI KENKYUSHO type IIR 100 meter with an Anti Glare treated
surface.
Haze
2