FID-550 SERIES
n
DIMENSION EXAMPLE (10.4” SHOWN)
46.20 2.0
3.50 1.0
243.80
236.80
217.10 (transparent area)
215.10
213.10 (input area)
123.75
(3.50)
(11.50)
(12.50)
(13.50)
(24.30)
15.20 1.0
16.20
17.20
24.30 1.0
48.80 1.0
Top
(8.00)
Right
Left
Unit: mm
Bottom
n
n
DETAILED SPECIFICATION
1.0 APPLICATION
This specification applies to the standard FID-550 series Touch Panel (Pen/Finger type).
n
2.0 ADDITIONAL APPLICATIONS
Complete specification document is available upon request for customers with whom we have an approved NDA
in place.
n
3.0 DISCRIPTION AND BLOCK DIAGRAM
This panel in combination with a control IC chip is used to transfer the co-ordinates of the touched position to
the host system (see block diagram above).
n
4.0 DRAWING (Please see the diagram above.)
A
Definitions of the major dimensions indicated on this diagram:
B
Effective Input Area (A)
Area guaranteed to meet all the
characteristics detailed in this specification
View / Transparent Area (B) The area inside the adhesive zone
or electrode pattern.
C
Anti-input Area (C)
An insulating area allowed to protect
the touch panel from giving false
readings when an enclosure touches
the panel.
Force
n
n
5.0 CHARACTERISTICS
5.1 MECHANICAL
Operating Force
0.05~0.49 N (5 ~ 50gF) Measured with
a Silicon Measurement Rod R 8
(Round type 8mm) Silicon Rubber
Hardness 60˚C
Hardness of Surface Pencil hardness 3H minimum against
specification JIS K-5400
Silicon Rubber Rod
n
5.2 OPTICAL
Transparency
78% min measured in the effective input area to JIS K 7105 using a
MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter. Typically 80%.
5% measured in the effective input area using a MURAKAMI
SHIKISAI KENKYUSHO type IIR 100 meter with an Anti Glare treated
surface.
Haze
2