MTWS Series – Femtocell Stratum III TCXO
Clipped Sinewave Output
Selected Stratum III Frequencies Available
Low Phase Noise
Tape and Reel Available
ELECTRICAL SPECIFICATION:
See Standard Frequencies Table
Other Frequencies Available on Request
Frequency Range
Supply Voltage (Vcc)
Current
+3.3 Vdc
+5.0 Vdc
6.0mA max
Initial Stability at +25°C
Stability vs. Temperature
±1.50ppm (after reflow)
±0.10ppm (-10°C to +70°C)
±0.28ppm (-40°C to +85°C)
±0.20ppm for 5% change in Supply Voltage
±0.10ppm for 10% change in Load
±40ppb
Frequency Stability
Stability vs. Supply Voltage
Stability vs. Load
After 24 hours at +25°C
After 24 hours from -40°C to +85°C
Holdover
±370ppb
Long Term Tolerance and Aging
Output
±4.60ppm for all and 20 years aging at +40°C
Clipped Sinewave
Amplitude
0.80 Vp-p min
Load
10K//10pF
Operating Temperature Range
Storage Temperature Range
See Part Number Guide
-40°C to +85°C
Control Voltage Range
Frequency Adjustment Range
Slope
+1.65 VDC ±1.65 VDC
±5.0 ppm min / ±15.0 ppm
Positive
Voltage Control Option (Pin 10)
Tri-State Function (Pin 8)
100 kΩ
Input Impedance
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% of Vdd max or grounded to Disable Output (High Impedance)
-95dBc/Hz max
-125dBc/Hz max
-130dBc/Hz max
-140dBc/Hz max
-145dBc/Hz max
10Hz
100Hz
1kHz
10kHz
100kHz
Phase Noise
(Phase Noise is typical data for 19.200MHZ only, does
not guarantee at other frequencies.)
Note: This unit is not hermitically sealed.
PART NUMBER GUIDE:
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Pb RoHS
Compliant
Free
Revision: MTWS061912B
Specifications subject to change without notice
Page 1 of 3