MPQ8875A – 36V, 4-SWITCH SYNC BUCK-BOOST CONVERTER WITH I2C, AEC-Q100
(1)
Thermal Resistance
θJA
θJC
ABSOLUTE MAXIMUM RATINGS
QFN-34 (4mmx5mm)
PVIN, PVOUT ...............................-0.3V to +42V
VSW1................................... -0.3V to PVIN + 0.3V
VSW2............................... -0.3V to PVOUT + 0.3V
VBST1..................... (VSW1 - 0.3V) to (VSW1 + 5.5V)
VBST2..................... (VSW2 - 0.3V) to (VSW2 + 5.5V)
All other pins................................-0.3V to +5.5V
Continuous power dissipation (TA = 25°C) (2)
QFN-34 (4mmx5mm).................................... 4W
Junction temperature................................150°C
Lead temperature .....................................260°C
Storage temperature................ -65°C to +150°C
JESD51-7 (3) .......................... 38.......8 ..... °C/W
EVQ8875A-VE-00A (4) ........... 31.......3 ..... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature, TJ (MAX), the junction-to-
ambient thermal resistance, θJA, and the ambient
temperature, TA. The maximum allowable continuous power
dissipation at any ambient temperature is calculated by PD
(MAX) = (TJ (MAX) - TA) / θJA. Exceeding the maximum
allowable power dissipation can cause excessive die
temperature, and the regulator may go into thermal shutdown.
Internal thermal shutdown circuitry protects the device from
permanent damage.
Electrostatic Discharge (ESD) Ratings
3) Measured on JESD51-7, 4-layer PCB. The value of θJA given
in this table is only valid for comparison with other packages,
and cannot be used for design purposes. These values were
calculated in accordance with JESD51-7, and simulated on a
specified JEDEC board. They do not represent the
performance obtained in an actual application.
4) Measured on EVQ8875A-VE-00A, 4-layer, 9cmx9cm PCB,
2oz copper.
Human body model (HBM) .................... ±2000V
Charged device model (CDM) ................ ±750V
Recommended Operating Conditions
Supply voltage (VIN):
Normal input mode...........................4.5V to 36V
Low input mode ...............................2.2V to 36V
Output voltage (VOUT) in CCM..........0.5V to 30V
Output voltage (VOUT) in DCM.............5V to 30V
Operating junction temp (TJ).... -40°C to +150°C
MPQ8875A Rev. 1.0
1/4/2021
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
7