MPQ3369 – 6-CHANNEL, BOOST WLED DRIVER W/ HIGH DIM RATIO AND I2C
Thermal Resistance (4)
QFN-24 (4mmx4mm)….…....…42…….9....°C/W
θJA
θJC
(1)
ABSOLUTE MAXIMUM RATINGS
VIN .................................................-0.3V to +42V
VSW, VLED1 to VLED6.........................-0.5V to +50V
VSW.......................................... -1.0V for <100ns
VSD ................................................VIN - 6V to VIN
All other pins...................................-0.3V to +6V
Junction temperature................................150°C
Lead temperature .....................................260°C
Continuous power dissipation (TA = 25°C) (2)
QFN-24 (4mmx4mm)............................... 2.97W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature, TJ (MAX), the junction-to-
ambient thermal resistance, θJA, and the ambient temperature,
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX) - TA) / θJA. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
ESD Rating
3) The device is not guaranteed to function outside of its operating
conditions.
4) Measured on JESD51-7, 4-layer PCB.
Human body model (HBM)
LED1-6 ESD ................................................ 8kV
All other pins................................................ 2kV
Charged device model (CDM) .................... 2kV
Recommended Operating Conditions (3)
Supply voltage (VIN) .........................3.5V to 36V
Operating junction temp (TJ).... -40°C to +125°C
MPQ3369 Rev. 1.0
4/17/2020
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.
5