Datasheet > MPM-9561

MPM-9561

更新时间： 2022-11-24 00:20:52

品牌	Logo	应用领域
BOSER		医疗
页数	文件大小	规格书
1页	51K
描述
60W Open Frame Power Supply for Medical Class

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MPM-9561 数据手册

MPM-9561

60W Open Frame Power Supply for Medical Class

12.7

0.5

11.56

Features

*Input Voltage: 85~264VAC

*Input Frequency: 47~63Hz at AC input

*Input Current: 2A at 115VAC or 1.5A at 230VAC max.

*Inrush Current: The maximum inrush current will not exceed

30A at 115VAC or 60A at 230VAC input, cold start, 25^oC

*Load Range: The adjustable range of +5V output is around

4.5~5.8V. At factory, the +5V output is set to between

4.95~5.05V at 60% rated load, and +/-12V are checked to be

within the specified voltage accuracy range. The peak load

cannot exceed 5 sec.

*Ripple And Noise: The peak to peak ripple and noise for +5V

output is less 50mV for +/-12V output are less than 100 mV.

Measuring is done by 15MHz bandwidth limited oscilloscope

and terminated each output with a 0.47uF capacitor

*Line Regulation: The line regulation for each output is less

than +/-1% while measuring at rated load and +/-10% of the

input changing

Safety Standards

*Safety: UL 544 / UL 2601-1 / CSA 22.2 No. 601-1 / TUV

(DIN. VDE 0750T. 1/12.91/EN60601-1L 1990)

*GND Leakage Current: It should be less 100uA at 244VAC

input

*EMI: FCC docket 20780 curve B / EN55011 B / EN61000-3-2

*EMS: IEC-801-2 8KV air discharge criteria B / IEC-801-3

3V/M / IEC-801-4 0.5KV

Output Min. Rated Max.

Voltage Load Load

Voltage

Accuracy

Load

3.5A

+5V

+12V

-12V

2.3A

0.5A

4.95~5.05V

11.4~12.6V

---- -11.4~-12.6V

*Load Regulation: The load regulation for +5V is less than +/-

1%, for +/-12V is less than +/-5%, measured is done by

changing the measured output load +/-40% from 60% rated

load, and keep all other output at 60% rated load

*Hold Up Time: The hold up time is longer than 16mS at

115VAC input and rated load, which is measured from the end

of the last charging pulse to when the main output drops down

to 95%output voltage

*Efficiency: The efficiency is higher than 75% typical while

measuring at nominal line and rated load

*Protection: For some reasons the power supply fails to

control itself, the build-in over voltage protection circuit will

shut down the outputs to prevent damaging to external

circuits. The trip point of crowbar circuit is around 5.8V to 7V

for output voltage. The power supply will go into latch off mode

against short circuit or over load conditio

*Dimensions: 7.62 x 12.7 x 3.87 cm

www.boser.com.tw

下载PDF

与MPM-9561相关器件

型号	品牌	描述	获取价格	数据表
MPMA (Divider)	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor, Surface Mount Network, AEC-	获取价格
MPMA10011002AT1	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor	获取价格
MPMA10011002AT5	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor	获取价格
MPMA10011002ATF	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor	获取价格
MPMA10011002ATP	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor	获取价格
MPMA10011002ATS	VISHAY	Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor	获取价格