MPL-SE5040-3R3 – SEMI-SHIELDED INDUCTOR 3.3µH
ORDERING INFORMATION
(2)
(3)
(4)
L (1)
RDC
IR
ISAT 25°C
ISAT 100°C
Part Number
typ (µH)
typ (mΩ)
typ (A)
typ (A)
typ (A)
MPL-SE5040-R47
MPL-SE5040-1R0
MPL-SE5040-1R5
MPL-SE5040-2R2
MPL-SE5040-3R3
MPL-SE5040-4R7
MPL-SE5040-6R8
MPL-SE5040-100
MPL-SE5040-150
MPL-SE5040-220
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
7.3
9.4
14
8.0
7.6
6.2
5.4
5.2
4.3
3.5
3.2
2.5
2.1
16
10.5
9.3
7.9
6.4
5
13.5
9
8.4
7.3
5.2
4.6
4
16
22
33
45
4.6
3.6
2.9
2.4
56
3
15
83
2.6
2.15
22
124
GENERAL SPECIFICATIONS
(1) Inductance
Measured at 100kHz, 100mA
Rated current will cause the coil temperature rise ΔT of 40K
IR measured with the inductor soldered in a single-layer PCB. Copper layer thickness
35µm Cu / PCB size 30x50mm. Temperature behavior dependent on circuit design,
PCB layout, proximity to other components, and trace dimensions and thickness.
(2) Rated Current
(3) Saturation Current 25°C
(4) Saturation Current 100°C
Temperature Test Condition
Saturation current will cause L to drop from 30% at 25°C ambient temperature
Saturation current will cause L to drop from 30% at 100°C ambient temperature
Electrical specifications measured at 25°C, 35% RH if not given differently
Operating temperature: -40°C to +125°C (including temp rise)
Should not exceed +125°C under worst-case operation conditions
Tape and Reel packaging: -10°C to +40°C
Operating Condition
Storage Condition
Humidity: <50% RH
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should
warrant and guarantee that third-party Intellectual Property rights are not infringed upon when integrating MPS products into any application.
MPS will not assume any legal responsibility for any said applications.
MPL-SE5040-3R3 Rev. 1.1
7/31/2019
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
5