MPL-AT2512-1R0 – LOW-PROFILE MOLDED INDUCTOR 1.0µH
ORDERING INFORMATION
(2)
(3)
(4)
L (1)
RDC
IR
ISAT 25°C
ISAT 100°C
Part Number
±20% (µH)
Typ (mΩ)
Typ (A)
Typ (A)
Typ (A)
MPL-AT2512-R33
MPL-AT2512-R47
MPL-AT2512-R68
MPL-AT2512-1R0
MPL-AT2512-1R5
MPL-AT2512-2R2
MPL-AT2512-3R3
MPL-AT2512-4R7
MPL-AT2512-6R8
MPL-AT2512-100
0.33
0.47
0.68
1
13
14
6.4
5.8
4.8
4.1
3.4
2.8
2.2
1.8
1.4
1.2
7.8
6.4
6
7.8
6.4
6
23
33
5.2
4.2
3.4
3
5.2
4.2
3.4
3
1.5
2.2
3.3
4.7
6.8
10
43
68
116
170
280
355
2.4
2.2
1.7
2.4
2.2
1.7
GENERAL SPECIFICATIONS
(1) Inductance
Measured at 100kHz, 100mA
Rated current will cause the coil temperature rise ΔT of 40K
IR measured with the inductor soldered in a single-layer PCB. Copper layer thickness
35µm Cu / PCB size 30x50mm. Temperature behavior dependent on circuit design,
PCB layout, proximity to other components, and trace dimensions and thickness.
(2) Rated Current
(3) Saturation Current 25°C
(4) Saturation Current 100°C
Temperature Test Condition
Saturation current will cause L to drop from 30% at 25°C ambient temperature
Saturation current will cause L to drop from 30% at 100°C ambient temperature
Electrical specifications measured at 25°C, 35% RH if not given differently
Operating temperature: -40°C to +125°C (including temp rise)
Should not exceed +125°C under worst-case operation conditions
Tape and Reel packaging: -10°C to +40°C
Operating Condition
Storage Condition
Humidity: <50% RH
MPL-AT2512-1R0 Rev. 1.2
www.MonolithicPower.com
4
7/6/2023
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2023 MPS. All Rights Reserved.