MP7200 – 42V, 1.2A, BUCK-BOOST OR 3A BUCK SYNCHRONOUS LED DRIVER
(1)
Thermal Resistance
θJA θJC
ABSOLUTE MAXIMUM RATINGS
QFN-19 (3mmx4mm)
VIN - VPGND/AGND..............................-0.3V to +50V
VIN - VINGND ....................................-0.3V to +50V
VINGND - VPGND/AGND.........................-0.3V to +50V
VFAULT - VINGND ...............................-0.3V to +50V
VEN/DIM - VINGND..............................-0.3V to +5.5V
VSW - VPGND/AGND -0.3V to VIN - VPGND/AGND + 0.3V
VBST ................................................... VSW + 5.5V
VNTC - VPGND/AGND ...........................-0.3V to +50V
All other pins - VPGND/AGND.............-0.3V to +5.5V
Continuous power dissipation (TA = 25°C) (2) (4)
QFN-19 (3mmx4mm)................................. 3.9W
Junction temperature................................150°C
Lead temperature .....................................260°C
Storage temperature................ -65°C to +150°C
JESD51-7 (3) ...........................48...... 11... °C/W
EVQ7200-L-00A (4) .................32....... 6.... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature, TJ (MAX), the junction-to-
ambient thermal resistance, θJA, and the ambient temperature,
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX) - TA) / θJA. Exceeding the maximum allowable power
dissipation can cause excessive die temperature, and the
regulator may go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) Measured on JESD51-7, 4-layer PCB. The value of θJA given
in this table is only valid for comparison with other packages
and cannot be used for design purposes. These values were
calculated in accordance with JESD51-7 and simulated on a
specified JEDEC board. They do not represent the
performance obtained in an actual application.
ESD Ratings
Human body model (HBM) ........................±2kV
Charged device model (CDM) ................ ±750V
4) Measured on MPS standard EVB of MP7200, 2oz, 4-layer
PCB.
Recommended Operating Conditions
Supply voltage (VIN - VPGND)................6V to 42V
LED current (ILED) in buck-boost mode…………..
…………………………………………..Up to 1.2A
LED current (ILED) in buck mode ...........Up to 3A
Operating junction temp (TJ)….-40°C to +125°C
MP7200 Rev. 1.0
1/21/2021
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
5