MP44014-A
Boundary Mode PFC Controller
The Future of Analog IC Technology
FEATURES
DESCRIPTION
Boundary Conduction Mode PFC Controller
for Pre-Regulator
Zero-Crossing Compensation to Minimum
THD of AC Input Current
Precise Adjustable Output Over-Voltage
Protection
The MP44014-A is a boundary conduction
mode PFC controller that provides simple and
high-performance active power-factor correction
using minimum external components.
The output voltage is regulated accurately by a
high-performance voltage-mode amplifier with
an accurate internal voltage reference.
Ultra-Low (15μA) Start-Up Current
Low Quiescent Current (0.46mA) at OVP
Condition
The precise adjustable output over-voltage
protection greatly enhances the system
reliability.
On-Chip Filter on Current Sense Pin
Enable/Disable and Open-Loop Protection
Function on FB
The on-chip R/C filter on the current sense pin
can potentially eliminate the external R/C filter.
-750/+800mA Peak Gate-Drive Current
APPLICATIONS
The extremely low start-up current, quiescent
current, and the disable function reduces the
power consumption, resulting in excellent
efficiency performance.
Offline Adaptors
Electronic Ballasts
LLC Front End
Other PFC Pre-Regulators
The MP44014-A is available in a SOIC-8.
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under Quality Assurance. “MPS”
and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP44014-A Rev. 1.01
11/10/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
www.MonolithicPower.com
1