MP2886A
Digital, Multi-Phase PWM Controller
with PMBus and PWM-VID
DESCRIPTION
FEATURES
The MP2886A is a digital, multi-phase, pulse-
width modulation (PWM) controller with a digital
PWM-VID interface that is compatible with
NVIDIA’s Open VReg specification. The
MP2886A works with MPS’ Intelli-Phase
products to complete the multi-phase voltage
regulator (VR) solution with minimal external
components. The MP2886A can be configured
with up to 6-phase operation.
Programmable Multi-Phase up to 6 Phases
PWM-VID Interface Compatible with NVIDIA
PMBus/I2C Compliant (1MHz Bus Speed)
Pin Programmable for PMBus Address
Built-In EEPROM to Store Custom
Configurations
Switching Frequency Range 200kHz to
5MHz
Automatic Loop Compensation
Fewer External Components than A
Conventional Analog Controller
Best Transient Performance with Non-
Linear Digital Control
Flexible Phase Assignment
Auto-Phase Shedding to Improve Overall
Efficiency
The MP2886A provides an on-chip EEPROM to
store and restore device configurations. Device
configurations and fault parameters can be
easily programmed or monitored via the
PMBus/I2C interface. The MP2886A can monitor
and report the output current through the CS
output from the Intelli-Phase products.
Phase-to-Phase Active Current Balancing
with Programmable Offsets for Thermal
Balance
Output Voltage/Current, Input Voltage/
Power Monitoring
Regulator Temperature Monitoring
VIN UVLO, Output OVP/UVP, OCP, OTP
with No Action, Latch, Retry, or Hiccup
Mode Options
Detecting for Intelli-Phase MOSFET Fault
Type and Auto-Record to EEPROM
Register Map Password Lock
Digital Load-Line Regulation
The MP2886A is based on a unique, digital,
multi-phase, non-linear control and provides fast
transient response to the load transient with
minimal output capacitors. With only one power-
loop control method for both steady state and
load transient, the power loop compensation is
very easy to configure.
The MP2886A is available in a QFN-40
(5mmx5mm) package.
Available in an RoHS Compliant QFN-40
(5mmx5mm) Package
APPLICATIONS
Graphic Card Core Power
Server Core Power
Telecom and Networking Systems
Base Stations
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS” and “The Future of Analog IC Technology” are registered
trademarks of Monolithic Power Systems, Inc.
MP2886A Rev. 1.0
1/21/2019
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
1