3015POWERINDUCTORS
High-Reliability Power Inductors ML412PJB
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
Core material Ferrite
Terminations Silver-palladium-platinum-glass frit
Weight 40 – 45 mg
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 1000/7″ reel
Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing,
1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm
SRF (MHz)4
min typ
133
98.0
94.5
77.0
63.0
Isat (A)5
10ꢀ drop ±0ꢀ drop 30ꢀ drop
Irms (A)6
±0°C rise 40°C rise
Inductance2
±±0ꢀ (ꢁH)
DCR max3
(Ohms)
0.075
0.100
0.100
0.110
0.130
Part number1
ML412PJB102MLZ
ML412PJB152MLZ
ML412PJB182MLZ
ML412PJB222MLZ
ML412PJB332MLZ
1.0
1.5
1.8
2.2
3.3
190
140
135
110
90
1.8
1.8
1.5
2.0
1.4
2.0
2.1
1.7
2.0
1.5
2.1
2.2
2.1
2.1
1.5
1.1
1.6
1.4
1.1
1.1
1.1
1.0
0.88
0.88
0.80
ML412PJB472MLZ
ML412PJB682MLZ
ML412PJB103MLZ
ML412PJB153MLZ
ML412PJB183MLZ
4.7
6.8
10
0.200
0.300
0.440
0.700
0.750
55.3
40.6
33.6
24.5
23.1
79
58
48
35
33
1.1
1.2
1.2
0.72
0.54
0.44
0.35
0.34
1.0
0.83
0.60
0.58
0.56
0.86
0.69
0.61
0.58
0.89
0.73
0.62
0.59
0.72
0.60
0.47
0.46
15
18
ML412PJB223MLZ
ML412PJB333MLZ
ML412PJB473MLZ
ML412PJB683MLZ
ML412PJB104MLZ
22
33
0.825
1.30
1.55
2.25
3.40
21.0
16.1
11.9
30
23
17
14
11
0.48
0.39
0.36
0.30
0.24
0.49
0.41
0.38
0.31
0.25
0.50
0.42
0.39
0.32
0.26
0.34
0.28
0.24
0.20
0.15
0.46
0.38
0.32
0.26
0.21
47
68
100
9.80
7.70
ML412PJB124MLZ
ML412PJB154MLZ
ML412PJB184MLZ
ML412PJB224MLZ
ML412PJB334MLZ
120
150
180
220
330
4.60
6.10
8.60
9.50
23.0
6.30
5.60
5.25
4.20
3.50
9.0
0.21
0.19
0.16
0.15
0.10
0.22
0.20
0.17
0.16
0.11
0.23
0.20
0.17
0.16
0.11
0.14
0.18
0.16
0.14
0.12
0.080
8.0
7.5
6.0
5.0
0.12
0.10
0.090
0.060
1. When ordering, please specify testing code:
ML41±PJB333MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
C = Custom screening (please specify when ordering)
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
Inductance at 1 MHz is the same for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop from its value
without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
®
Please check our website for latest information. Document ML436-1 Revised 01/24/11
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2012