FEDL22Q62X-06
ML22Q62X
Initial
Pin
14
Symbol
IOVDD
I/O
P
Attribute
-
Description
value *1
Flash memory interface power supply pin.
Connect to DVDD pin even when not using flash memory interface.
Connect a bypass capacitor between this pin and the DGND pin.
3.0V regulator outputs. Used as a power supply for flash memory.
—
Connect a capacitor between this pin and DGND pin as close as
possible.
Connect this pin to the DVDD pin when DVDD = 2.7 to 3.6V
Crystal or ceramic resonator connection pin.
When an external clock is used, leave it open and capacitor is not
15
16
VDDR
XTB
O
O
-
L
Negative required when a crystal or ceramic resonator is connected.
When using a resonator, connect it as close as possible.
Leave it open when not in use.
H
Crystal or ceramic resonator connection pin.
A feedback resistor of about 1MΩ is built in between the XT pin and
the XTB pin.
17
XT
I
Positive To use an external clock, input from this pin. Delete the capacitor
when a crystal or ceramic resonator is connected.
When using a resonator, connect it as close as possible.
Leave it open when not in use.
L
Digital power supply pin.
Connect a bypass capacitor between this pin and the DGND pin.
2.5V regulator output pin.
Used as internal power supply.
19
20
DVDD
VDDL
P
-
—
L
O
-
Connect a capacitor between this pin and DGND pin as close as
possible.
Reference voltage output pin for the built-in speaker amplifier.
Connect a capacitor between this pin and SPGND pin.
Speaker amplifier analog signal input pin.
Initially, input is disabled.
21
22
SG
O
I
-
L
L
AIN
-
Power supply pin for speaker amplifier.
Connect a bypass capacitor between this pin and the SPGND pin.
Speaker amplifier ground pin.
Positive output pin of the speaker amplifier.
Line amplifier outputs are also available with AMODE command.
Negative output pin of the speaker amplifier.
23
24
26
27
SPVDD
SPGND
SPP
P
G
O
O
-
—
—
-
-
-
L
SPM
Hi-Z
*1 Initial value at reset input and power-down. The pin whose IO is "I" indicates a fixed level from outside.
6/123