Datasheet > MKE04Z128VLD4R

MKE04Z128VLD4R

更新时间： 2024-09-26 00:46:47

品牌	Logo	应用领域
恩智浦 - NXP		/
页数	文件大小	规格书
37页	670K
描述
KE04 Sub-Family

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MKE04Z128VLD4R 数据手册

Document Number MKE04P80M48SF0

Rev. 4, 07/2016

NXP Semiconductors

Data Sheet: Technical Data

MKE04P80M48SF0

KE04 Sub-Family Data Sheet

Supports the following:

MKE04Z64VLD4(R),

MKE04Z128VLD4(R),

MKE04Z64VQH4(R),

MKE04Z128VQH4(R),

MKE04Z64VLH4(R),

MKE04Z128VLH4(R),

MKE04Z64VLK4(R) and

MKE04Z128VLK4(R)

Key features

• Security and integrity modules

– 80-bit unique identification (ID) number per chip

• Operating characteristics

– Voltage range: 2.7 to 5.5 V

• Human-machine interface

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

– Up to 71 general-purpose input/output (GPIO)

– Two 32-bit keyboard interrupt modules (KBI)

– External interrupt (IRQ)

• Performance

– Up to 48 MHz ARM® Cortex-M0+ core

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Analog modules

– One up to 16-channel 12-bit SAR ADC, operation in

Stop mode, optional hardware trigger (ADC)

– Two analog comparators containing a 6-bit DAC

and programmable reference input (ACMP)

• Memories and memory interfaces

– Up to 128 KB flash

– Up to 16 KB RAM

• Timers

– One 6-channel FlexTimer/PWM (FTM)

– Two 2-channel FlexTimer/PWM (FTM)

– One 2-channel periodic interrupt timer (PIT)

– One pulse width timer (PWT)

– One real-time clock (RTC)

• Clocks

– Oscillator (OSC) - supports 32.768 kHz crystal or 4

MHz to 24 MHz crystal or ceramic resonator; choice

of low power or high gain oscillators

– Internal clock source (ICS) - internal FLL with

internal or external reference, 37.5 kHz pre-trimmed

internal reference for 48 MHz system clock

– Internal 1 kHz low-power oscillator (LPO)

• Communication interfaces

– Two SPI modules (SPI)

– Up to three UART modules (UART)

– Two I2C modules (I2C)

• System peripherals

– Power management module (PMC) with three power

modes: Run, Wait, Stop

• Package options

– 80-pin LQFP

– Low-voltage detection (LVD) with reset or interrupt,

selectable trip points

– 64-pin QFP/LQFP

– 44-pin LQFP

– Watchdog with independent clock source (WDOG)

– Programmable cyclic redundancy check module

(CRC)

– Serial wire debug interface (SWD)

– Aliased SRAM bitband region (BIT-BAND)

– Bit manipulation engine (BME)

NXP reserves the right to change the production detail specifications as may be

required to permit improvements in the design of its products.

12 3 4 5 6 7...37

中文翻译

下载PDF

与MKE04Z128VLD4R相关器件

型号	品牌	获取价格	描述	数据表
MKE04Z128VLH4	NXP	获取价格	KE04 Sub-Family
MKE04Z128VLH4R	NXP	获取价格	KE04 Sub-Family
MKE04Z128VLK4	NXP	获取价格	KE04 Sub-Family
MKE04Z128VLK4R	NXP	获取价格	KE04 Sub-Family
MKE04Z128VQH4	NXP	获取价格	KE04 Sub-Family
MKE04Z128VQH4R	NXP	获取价格	KE04 Sub-Family
MKE04Z64VLD4	NXP	获取价格	KE04 Sub-Family
MKE04Z64VLD4R	NXP	获取价格	KE04 Sub-Family
MKE04Z64VLH4	NXP	获取价格	KE04 Sub-Family
MKE04Z64VLH4R	NXP	获取价格	KE04 Sub-Family