Datasheet > MIC45208-1

MIC45208-1

更新时间： 2024-10-02 01:10:43

品牌	Logo	应用领域
麦瑞 - MICREL		/
页数	文件大小	规格书
35页	2947K
描述
26V 10A DC-to-DC Power Module

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MIC45208-1 数据手册

MIC45208-1/-2

26V 10A DC-to-DC Power Module

General Description

Features

Micrel’s MIC45208 is a synchronous step-down regulator

module, featuring a unique adaptive ON-time control

• No compensation required

• Up to 10A output current

• >93% peak efficiency

• Output voltage: 0.8V to 5.5V with ±1% accuracy

• Adjustable switching frequency from 200kHz to 600kHz

• Enable input and open-drain power good (PG) output

architecture. The module incorporates

DC-to-DC

controller, power MOSFETs, bootstrap diode, bootstrap

capacitor, and an inductor in a single package; simplifying

the design and layout process for the end user.

This highly-integrated solution expedites system design

and improves product time-to-market. The internal

MOSFETs and inductor are optimized to achieve high

efficiency at a low output voltage. The fully-optimized

design can deliver up to 10A current under a wide input

voltage range of 4.5V to 26V, without requiring additional

cooling.

The MIC45208-1 uses Micrel’s HyperLight Load^®(HLL)

while the MIC45208-2 uses Micrel’s Hyper Speed

Control™ (HSC) architecture, which enables ultra-fast load

transient response, allowing for a reduction of output

capacitance. The MIC45208 offers 1% output accuracy

that can be adjusted from 0.8V to 5.5V with two external

resistors. Additional features include thermal shutdown

protection, input undervoltage lockout, adjustable current

limit, and short circuit protection. The MIC45208 allows for

safe start-up into a pre-biased output.

• Hyper Speed Control (MIC45208-2) architecture

enables fast transient response

• HyperLight Load (MIC45208-1) improves light load

efficiency

• Supports safe startup into pre-biased output

• CISPR22, Class B compliant

• –40°C to +125°C junction temperature range

• Thermal-shutdown protection

• Short-circuit protection with hiccup mode

• Adjustable current limit

• Available in 52-pin 10mm × 10mm × 4mm QFN package

Applications

• High power density point-of-load conversion

• Servers, routers, networking, and base stations

• FPGAs, DSP, and low-voltage ASIC power supplies

• Industrial and medical equipment

Datasheet and other support documentation can be found

on Micrel’s web site at: www.micrel.com.

Typical Application

Efficiency (V_IN= 12V)

vs. Output Current (MIC45208-1)

100

5.0V_OUT

3.3V_OUT

2.5V_OUT

1.8V_OUT

1.5V_OUT

1.2V_OUT

1.0V_OUT

0.8V_OUT

f_SW= 600kHz

OUTPUT CURRENT (A)

Hyper Speed Control is a trademark of Micrel, Inc.

HyperLight Load is a registered trademark of Micrel, Inc.

Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com

February 6, 2015

Revision 2.0

12 3 4 5 6 7...35

中文翻译

下载PDF

与MIC45208-1相关器件

型号	品牌	获取价格	描述	数据表
MIC45208-1YMP	MICREL	获取价格	26V 10A DC-to-DC Power Module
MIC45208-1YMP-TR	MICROCHIP	获取价格	DC/DC CONVERTER 0.8-5.5V 55W
MIC45208-2YMP	MICREL	获取价格	26V 10A DC-to-DC Power Module
MIC45212	MICREL	获取价格	26V/14A DC-to-DC Power Module
MIC45212	MICROCHIP	获取价格	MIC45212 is a synchronous step-down regulator module, featuring a unique adaptive ON-time
MIC45212_15	MICREL	获取价格	26V/14A DC-to-DC Power Module
MIC45212-1YMP	MICREL	获取价格	26V/14A DC-to-DC Power Module
MIC45212-1YMP-T1	MICROCHIP	获取价格	DC/DC CONVERTER 0.8-5.5V 77W
MIC45212-2YMP	MICREL	获取价格	26V/14A DC-to-DC Power Module
MIC45212-2YMP-T1	MICROCHIP	获取价格	DC/DC CONVERTER 0.8-5.5V 77W

与MIC45208-1相关文章

塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
2024-09-29

36
英特尔震撼发布：128核心256线程的至强6性能核处理器
2024-09-29

30
SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

28
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

39

产品中心

服务支持

精选活动

关于我们

帮助中心

MIC45208-1

MIC45208-1 数据手册

与MIC45208-1相关器件

与MIC45208-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MIC45208-1

MIC45208-1 数据手册

与MIC45208-1相关器件

与MIC45208-1相关文章

您还可以找

您在本页遇到什么问题？