MMIC Medium Level Mixer
800 - 1000 MHz
MD54-0004
V2.00
Features
SO-8
●
Low Conversion Loss
PIN 8
.2284-.2440
(5.80-6.20)
.010(0.25) M B M
●
+21 dBm 1 dB Compression
LO Drive Level: +11 to +23 dBm
DC - 100 MHz IF Bandwidth
Low Cost Plastic SOIC Package
.1497-.1574
(3.80-4.00)
- B -
●
Orientation
mark
PIN 1
●
●
.0099-0.0196
.1890-.1968
(4.80-5.00)
- A -
.0532-.0688
(1.35-1.75)
x 45° Chamfer
(0.25-0.50)
0°-8°
Description
- C -
M/A-COM’s MD54-0004 is a passive mixer that achieves
the performance of a double balanced diode mixer in a
low cost surface mount plastic SOIC 8-lead package. The
MD54-0004 is ideally suited for use where high level RF
signals and very wide dynamic range are required.
Typical applications include frequency up/down
conversion, modulation, demodulation in systems such
as cellular receivers and transmitters, and 900 MHz ISM
band applications.
.004 (0.10)
.016-.050
.0040-.0098
(0.10-0.25)
(0.40-1.27)
.0075-0.0098
(0.19-0.25)
.013-.020 TYP.
(0.33-0.51)
.050(1.27) BSC.
.010(0.25) M C A M B S
8- Lead SOP outline dimensions
Narrow body .150
(All dimensions per JEDEC No. MS-012-AA, Issue C)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ±0.5)
The MD54-0004 uses FETs as mixing elements to achieve
very wide dynamic range in a low cost plastic package.
The mixer operates with LO drive levels of +11 dBm to
+25 dBm. DC bias is not required.
Ordering Information
Part Number
Description
MD54-0004
SOIC 8-Lead Plastic Package
M/A-COM’s MD54-0004 is fabricated using a mature
1-micron GaAs process. The process features full IC
passivation for increased performance and reliability.
MD54-0004TR
MD54-0004RTR
MD54-0004SMB
Forward Tape & Reel
Reverse Tape & Reel
*
*
Designer’s Kit
Standard reel size is 7 inches. If other reel size is required, consult
factory for part number assignment.
*
Electrical Specifications
Test Conditions: RF = 900 MHz (-10 dBm), LO = 840 MHz (13 dBm), IF = 60 MHz, T = +25°C
A
Parameter
Conversion Loss
Isolation
Test Conditions
Units
dB
dB
dB
dB
Min.
Typ.
7.5
38
22
12
2.5:1
2.0:1
2.0:1
+21
Max.
9.5
LO to RF
LO to IF
RF to IF
LO Port
RF Port
IF Port
25
VSWR
Input 1 dB Compression
Two-Tone IM Ratio1
RF Freq. = 900 MHz, LO = +13 dBm
Two tones at -10 dBm each,
Tone spacing = 100 kHz, IF = 60 MHz
dBm
dBc
45
60
1. IMR vs RF drive level can be calculated by the formula: IMR = 45 - (1.5 x P ).
IN
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
1
North America: Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific: Tel. +81 (03) 3226-1671
Fax +81 (03) 3226-1451
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020