MCP16301/H
High-Voltage Input Integrated Switch Step-Down Regulator
Features
General Description
• Up to 96% Typical Efficiency
• Input Voltage Range:
The MCP16301/H devices are highly integrated,
high-efficiency, fixed-frequency, step-down DC-DC
converters in a popular 6-pin SOT-23 package that
operates from input voltage sources up to 36V.
- 4.0V to 30V (MCP16301)
- 4.7V to 36V (MCP16301H)
• Output Voltage Range: 2.0V to 15V
• 2% Output Voltage Accuracy
Integrated features include
a
high-side switch,
fixed-frequency peak current mode control, internal
compensation, peak current limit and overtemperature
protection. Minimal external components are
necessary to develop a complete step-down DC-DC
converter power supply.
• Qualification: AEC-Q100 Rev G, Grade 1
(-40°C to +125°C)
• Integrated N-Channel Buck Switch: 460 m
• Minimum 600 mA Output Current Over All Input
Voltage Range (See Figure 2-6 for Maximum
Output Current vs. VIN):
High converter efficiency is achieved by integrating the
current-limited, low-resistance, high-speed N-Channel
MOSFET and associated drive circuitry. High
switching frequency minimizes the size of external
filtering components, resulting in a small solution size.
- up to 1A output current at 3.3V, 5V and 12V
VOUT, SOT-23 package at +25°C ambient
temperature
The MCP16301/H devices can supply 600 mA of
continuous current while regulating the output voltage
from 2.0V to 15V. An integrated, high-performance
peak current mode architecture keeps the output
voltage tightly regulated, even during input voltage
steps and output current transient conditions that are
common in power systems.
• 500 kHz Fixed Frequency
• Adjustable Output Voltage
• Low Device Shutdown Current
• Peak Current Mode Control
• Internal Compensation
• Stable with Ceramic Capacitors
• Internal Soft-Start
The EN input is used to turn the device on and off.
While turned off, only a few micro amps of current are
consumed from the input for power shedding and load
distribution applications.
• Cycle-by-Cycle Peak Current Limit
• Undervoltage Lockout (UVLO): 3.5V
• Overtemperature Protection
• Available Package: SOT-23-6
Output voltage is set with an external resistor divider.
The MCP16301/H devices are offered in
space-saving SOT-23-6 surface mount package.
a
Applications
• PIC® Microcontroller and dsPIC® Digital Signal
Controller Bias Supply
Package Type
MCP16301/H
6-Lead SOT-23
• 24V Industrial Input DC-DC Conversion
• Set-Top Boxes
• DSL Cable Modems
1
2
3
6
5
4
SW
VIN
BOOST
• Automotive
• Wall Cube Regulation
• SLA Battery-Powered Devices
• AC-DC Digital Control Power Source
• Power Meters
GND
VFB
EN
• D2 Package Linear Regulator Replacement
- See Figure 5-2
• Consumer
• Medical and Health Care
• Distributed Power Supplies
2011-2015 Microchip Technology Inc.
DS20005004D-page 1