Datasheet > MB3829PFV-G-BND

MB3829PFV-G-BND

更新时间： 2022-11-25 22:18:01

品牌	Logo	应用领域
富士通 - FUJITSU		移动电话
页数	文件大小	规格书
24页	441K
描述
System Power Supply IC for Mobile Telephone

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

MB3829PFV-G-BND 数据手册

MB3829

Function Descriptions

1. Power supply control section

(1) Reference voltage circuit

The reference voltage circuit generates a temperature-compensated, stable voltage (≈ 1.26 V). The generated

reference voltage is used as the power supply control section reference voltage or bias.

(2) Series regulator section

A 4-channel series regulator incorporating a low-saturation output transistor is used. All four channels provide an

output voltage of 3.0 V. Their characteristics are described below.

REG1 is suitable for a microcontroller power supply because it is connected to a power-on reset circuit. It is

controlled by the ON/OFF switch section.

ON/OFF control of REG2 and REG3 is exercised independently by the CTL2 and CTL3 pins while REG1 is ON.

REG4 operates at all times and is therefore suitable for data backup.

REGs 1 through 4 incorporate an overcurrent-protection circuit (REG1 to REG3 ≈ -100 mA, REG4 ≈ -25 mA).

(3) Battery backup section

When the main battery is installed, the series regulator recharges a button-type lithium secondary battery, which is

often used to provide backup for clocks and memory. When the main battery is not installed, the backup battery

supplies power to clocks and the battery via a built-in diode. Since the recharging series regulator is set at 3.18 V,

this battery backup section is suitable for manganese and lithium batteries.

(4) ON/OFF switch section

When a time-setup capacitance and resistance are connected to the CT1 pin, the ON1 pin makes it possible to set

the power supply button activation time. This feature prevents turning ON a mobile telephone accidentally.

The ON2 and OFF pins provide a method of exercising direct ON/OFF control of the regulator.

ON time setting calculation formula: T_ON≈ -C x R x ln (1-1.26V/V )

CC2

(5) Momentary power-loss function and power-restoration section

When a time-setup capacitance and resistance are connected to the CT3 pin, a momentary Vcc loss, which may be

caused by battery replacement, etc., will be detected so as to deliver output to the TOUT pin. At power restoration,

the operating state before the momentary power loss is recovered.

After a momentary power loss, the CLR pin resets the prevailing state so that the momentary power-loss detection

circuit retains the latch circuit state.

Momentary power-loss detection time calculation formula: T_OFF≈ -C x R x ln (1-(2.3V - 0.27V)/2.3V)

1...3 4 567 8 9...24

下载PDF

型号	品牌	描述	获取价格	数据表
MB3832A	FUJITSU	DC/DC Converter IC for Charging	获取价格
MB3832A_03	FUJITSU	DC/DC Converter IC for Charging	获取价格
MB3832APFV	FUJITSU	DC/DC Converter IC for Charging	获取价格
MB3833A	FUJITSU	Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Funct	获取价格
MB3833APFV	FUJITSU	Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Funct	获取价格
MB3833APFV-G-BND	FUJITSU	Battery Charge Controller, Voltage-mode, 0.5A, 500kHz Switching Freq-Max, PDSO16, PLASTIC,	获取价格