19-2075; Rev 0; 7/01
Integrated Cellular RF-Section
Power-Management IC
General Description
Features
The MAX8890 is a power-management IC intended for
cellular handsets using a single lithium-ion (Li+) cell
battery with input voltages from +2.5V to +5.5V. The IC
contains three identical, low-noise, low-dropout (LDO)
linear regulators to provide all of the supply voltage
requirements for the RF portion of the handset.
ꢀ Three 100mA Low-Dropout Linear Regulators
ꢀ Low 50mV Dropout Voltage at 100mA
1ꢀ ꢁutput Voltage Aꢂꢂuraꢂc ꢁOer Temperature
ꢀ
ꢀ Preset 1.8V to 3.3V ꢁutput Voltages
(in 50mV Inꢂrements)
The first LDO is intended to power the transmitter,
receiver, and synthesizer. The second LDO is intended
to power the TCXO, and high-power voltage-controlled
oscillators (VCOs). The third LDO is intended to power
the UHF offset VCO.
ꢀ Low 45µV
ꢁutput Voltage Noise
RMS
ꢀ Low 180µA ꢁperating Supplc Current
ꢀ 2.5V to 5.5V Input Voltage Range
ꢀ 67dB PSRR
Each LDO has its own individual enable (ON/OFF) con-
trol to maximize design flexibility. The reference is pow-
ered on if any of the enable inputs (EN1, EN2, EN3) are
logic high. The high-accuracy output voltage of each
LDO is preset at an internally trimmed voltage (1.8V to
3.3V in 50mV increments). Each LDO is capable of sup-
plying 100mA with a low 50mV dropout and is opti-
mized for low noise and high crosstalk-isolation.
Designed with internal P-channel MOSFET pass transis-
tors, the MAX8890’s low 180µA operating supply cur-
rent is independent of load.
ꢀ 10µVp-p Channel-to-Channel Crosstalk
ꢀ Short-Cirꢂuit Proteꢂtion
ꢀ Thermal ꢁOerload Proteꢂtion
ꢀ 0.01µA Shutdown Current
ꢀ Tinc 12-Pin 4mm x 4mm QFN Paꢂkage
Ordering Information
PART
TEMP. RANGE
PIN-PACKAGE
Other features include short-circuit and thermal over-
load protection. The MAX8890 is available in a com-
MAX8890EGCxyz*
-40°C to +85°C
12 (4 x 4) QFN
✕
pact, high-power, 12-pin 4mm 4mm QFN package
*Each preset output voltage of these devices is factory
trimmed to one of ten voltages. Replace “xyz” with the letters
corresponding to the desired output voltages (see Standard
Preset Output Voltage Suffixes table), where the three letter
suffix corresponds to the following output voltages: “x” =
with a metal pad on the underside.
Applications
Cellular Handsets
V
OUT1
, “y” = V
, and “z” = V
.
OUT2
OUT3
Single-Cell Li+ Systems
Note: There are five standard versions available (see Standard
Versions table). Sample stock is generally held on standard
versions only. Standard versions have an order increment
requirement of 2500 pieces. Nonstandard versions have an
order increment requirement of 10,000 pieces. Contact the
factory for availability of nonstandard versions.
3-Cell NiMH, NiCD, or Alkaline Systems
Personal Digital Assistants (PDAs)
Standard Preset Output
Voltage Suffixes
Typical Operating Circuit
ꢁUTPUT
VꢁLTAGE (V)
ꢁUTPUT
VꢁLTAGE (V)
INPUT
SUFFIX
SUFFIX
OUTPUT #1
IN1
OUT1
A
B
D
F
3.30
3.00
2.90
2.85
2.80
H
J
2.75
2.70
2.50
2.00
1.80
OUTPUT #2
OUTPUT #3
IN2
IN3
EN1
OUT2
OUT3
BP
K
L
MAX8890
G
M
ON
OFF
*Nonstandard output voltages between 1.80V and 3.30V are
available in 50mV increments.
EN2
EN3
GND
Standard Versions table and Pin Configuration appear at
end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
5秒后页面跳转
塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
英特尔震撼发布：128核心256线程的至强6性能核处理器
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
